Viewing all customer Discussions for:

90-278 Lock & Keeper, 2-1/16"

The plastic pieces in the pics have yellowed because of the sun/uv. Would you have anything in some type of metal ? I would need a total of 12 sets . I just purchased this mobile home and have not seen a manufacturer name on windows Please call if you have any questions . Thanks Bob ... (cont.)

It is a window lock. The holding screws are on the back corners. It fell apart.

need help in determing what would be a replacment part for attached parts

Hi I have several windows that have failed balances. There preventing my windows from opening and staying open. The hook at the one end of these fixes to the top of the window frame. I assume that there is at the bottom of part of the balance that has caused the issue. I haven't looked for this part ... (cont.)

hello - looking for 2 arcor replacement sash locks - square design in white - for extra wide locking - 1 inch between latch screws and keeper screws - please advise thanks rick

Do you have replacement hardware for this?

Hello,I don't have any writen information for these vinyl tilt replacement windows. I'm looking for help to make sure I order the correct parts, thank you!I'm thinking the balances list below will work the sizes are 21" and 24". The top window color is dark blue, the lower window is a teal color.2 ... (cont.)

Good morning. I am looking for a sash lock to fit this one in the photos. Not sure who the maker of the window is, it appears to be old and white vinyl double hung. please let me know your thoughts. Thanks

1/4 inch keeper and lock with screw holes 11/16 in set back from edge of window. cannot find these 2 together in 1 lock and latch set

Holes are 2 1/16" apart. Back set 11/16".

Need help identifying window lock hardware. Screw width is 2-1/4" and overall part depth is 5/16". Lock screw width is 2-1/16" and depth of screws to face is 11/16" Thank you.

Having a hard time finding replacement locks for a few broken ones in our new home. On the lock, the holes are 2 1/6" apart and from the holes to the edge of the lock is 1". The lock height is 1/2". The keeper holes are 1 7/8" and the closer, raised mount holes are 1" apart center to center. The ... (cont.)

Canon find any markings or numbers on hardware.

I am looking for a window latch that will fit existing window.

Prism broken latch

Need missing top check rail glazing bead. Upper window is missing the bottom peice of beading that retains the glass, AND which the latch is screwed into. No window brand info. Can't find bead of correct profile/cross section. Tilt in lower window. Windows approximately 10 yrs. old. Any help appreci ... (cont.)

I need help in ordering this correct window latch. I tried ordering myself but ordered the wrong latches. I will attach pictures with hopes you can help me oeder the correct ones. Thanks Brad

I need the entire part to put on the window- both pieces. The one side broke.

I am looking to replace one of these Cam Locks that were installed in 2019 with 3 Replacement Vinyl Windows. I posted the Cam receiver so you can see what the Cam actually engages with. I have not been able to find anything close with a 2 inch hole spacing. The screw hole set back is 11/16" which se ... (cont.)

Hi. Could you please help me select the correct face mount keeper to replace this broken one? Thank you