Viewing all customer Discussions for:

90-278 Lock & Keeper, 2-1/16"

10 year old windows

only marking observed are two numbers on the back side of the lock. 13466 and 13467

The lock and keeper are from a window whose only identifying marks are 226 62 ax. No brand name is apparent The screw holes are about 2 inches apart and the lock itself is 3 and 13/16th wide. The only markings on the underside of the lock are 5456 119. Thank you!

Window lock for a double hung vinyl window. Approximately 2&3/4" wide on lock. Screw holes are 2-5/32" center to center. Sweep is marked with A-S 8963.

Do you have Amerimax window locks in white?

Hi looking to purchase replacement 2 piece locks for my vinyl windows. Distance btween screws (center to center) is 5"

Good Morning, I need the shown sash locks and sash springs. I'm having a hard time locating them. Can you please help? Thank you

Hello, I have Anderson Silverline windows and need tilt and lock replacements. I've put them in a cart but are these the correct ones? Photos of my window parts and what I added to the cart are attached. Thanks!

Color looks more like an eggshell color, if available.

I have 2 window licks that need replacement and have attached the photos. First 2 photos are the same lock with Daco printed on front. Last picture was a previous replaced lock. Looking to replace both of them

I need to replace a window but I don't know the brand and model of my existing windows in order to get a matching one.

Hi - I'm looking for replacement sash locks for what I think is an Alside double hung vinyl window. The underside of the existing lock is marked "J1" "8100" and "J11". Thanks!

numbers on windowsSeries 201 HS PL# 141-004tan in color2.140. from 2 screw holes. 1 inch wide 2007 or so I think when window builtThere are 2 latches per window/tan. Color does not matter.Flipss up and down Locks when down.

Is this the correct window lock sash for american craftsman 50 series windows?

I need to replace my worn out latches on my horizontal sliding vinyl windows. I would like to replace all 12 of my latches and keepers. The 90-282 recessed keeper matches all of the measurements on my existing hardware. I have not been able to identify a latch that matches up with this keeper and ... (cont.)

Hello, I need to replace several sash locks on ten year old single hung Silver Line vinyl windows. Would you have something with the same dimensions and shape?

We have a small frosted bathroom window, and the sash mechanism is broken. I can't find a brand name sticker on the window. Vinyl, approx 21"x17" verticle slide up side load. Any idea what parts I will need? If so, do you have instructions on how to make this kind of repair? Thanks for any hel ... (cont.)

I need 2 of the latches and 4 of the screws. I think I found the correct sash cam but was not able to locate the screw locks. Please help thank you!

Hello, I am looking for the lock in pictures. 2- 1/16 inch Hole Sopacing

Looking to replace broken locks on Napco windows from 2002. Lock has 8300 on backside. 8301-2 on back of lever. 8313 00-1 on the gray metal part of lock. Measurement at the widest is 2 7/8". The screw holes on the locking part are 2 1/16 - 1/8 " wide. Screw holes on latch are 2 3/16 - 1/4 ". Than ... (cont.)