Viewing all customer Discussions for:

90-279 Truth EntryGard Keeper, 2-1/16"

I need new window locks and have included 4 photos with the manufacturers name and other label. Plus a photo of the lock and one with the tape measure.Thank you for your help,Pat

This is a 90's hurd window.

Hi, does this keeper and the complimentary sash lock come in brass? Thank you! Hannah

Window was installed 10 years ago. The keeper has a small cut out so that it can sit properly on the frame of the window.

Hi - I see the description for this part recommends that you hang onto the screws since they don't come with the part. Do you also sell the screws? I'm replacing the locks and keepers at a beach house and the screws are terribly rusted into the current keepers. Many thanks!

These latches are on 22 year old Marvin double hung windows. The center to center measurement on the large piece is 2 1/16...other measurements are in one of my photos. The only markings are on large piece. It says "lock". There is a patent number underneath. 5.110.165

I ordered Truth EG Keepers, which are 5/16" wide, but they are not the replacement I need. What I need is a keeper that is 7/16" wide, to fit the Truth window lock. I'm enclosing a picture showing the old keeper (dark) and the new one I received (white) I'd appreciate if you can advise me as to t ... (cont.)

8212 on the keeper 3211 on the sash lock 2 1/16 screw center

Hi Friends:Please see attached photos of my Caradco sash lock. They are 2-9/16" wide with screw holes 2-1/32" on center. If you have these in any color (though I would prefer the original brown) I would like to order 4 units, please.I look forward to your response.Thanks and all the best,Tom ... (cont.)

Hello! I have a home that was renovated in the early 2000's with replacement windows from Architectural Building Components (I found this out by calling Keystone Corporation who used the manufacturer sticker to find the details). Anyways I have a few issues: - First a sagging upper sash in some w ... (cont.)

KEEPER DIMENSIONS: Center-set: 2-1/16", Width: 1/4". Overall length: 2-9/16". LATCH DIMENSIONS: Center-set: 2-27/32", Backset: 21/32", Overall length: 2-9/16".

If it heps, I believe the windows were manufactured by Caradco.

Looking for bronze colored sash lock for Rivco window made about 1993. The inside portion, raised center section is curved, not squared off. Shape of inside portion where it contacts the wood sash is also curved with straight end sides.

Just moved into a new house. The right latch is missing on one window. There is no serial number on this particular window, or even brand name. Other windows in the house are labeled as Pella and DuraSeal. Any idea?

I have a window lock without keeper. Do you have a keeper that would work with my lock? Thank you,

I need replacement locks in white for my windows. I think I found the parts on the site, but would like help to make sure they are the right ones.

Per the enclosed pictures and measurements (between holes) can you identify and tell me if you have a replacement latch?

I am trying to find white sash lock replacements for some Marvin wood double hung windows. I am trying to change them all from bronze to white. The windows are about 10-15 years old. The closest thing I found on your web site is code 90-161. The 2 1/16" hole span measurements match up on both p ... (cont.)