Viewing all customer Discussions for:

79-029 Weatherstripped Faceplate, Short Throw

moved my office into a strip mall commercial - this is what the front doors look like closing - big gap - old worn out half strip in place.. need something that will fill gap and secure my location from the outside elements. as u can seee from pic - only one of the doors has a slot for someth ... (cont.)

I'm looking for replacement weather stripping for this door as well some way to bridge the large gap between the two doors. the gap is close to 3/4" wide. Thank you Roger

I'm dealing with the subject door. I need: (1) Weatherstripped Faceplate - 1 1/8" x 7 1/4" Beveled-Brush Aluminum-I have a part number but am uncertain if it is the correct one. (30') Weathertripping (Wool pile). The existing weatherstripping measures 11/32" x 11/32". (2) Door Sweeps (W ... (cont.)

They are double entry doors, I measured at 1/4 x 1/4 do you carry something like this?

I have a commercial double front door that has lost pieces of its wool pile weatherstripping. The bottom sweep is also in bad shape. I'm having trouble finding the right measurements for this particular sized pile. The door is leaking air like crazy and we are in Florida so you can imagine that t ... (cont.)

I am looking to replace the sweep in my restaurant storefront main door. The piece is screwed into the frame. I will also be ordering a plate with the sweep included as well. My board of health inspection cited me for having too large a gap. Thank you for your help in figuring this out. -Julia ... (cont.)

I am looking for a strike plate measuring 6 7/8" x 1" which has weather pile built in.

Greetings, Do you have something that might work here? Thanks, Brad

Hi, where can I find this kind of rubber gaskets. I need about 20 pieces , 7' high. Thank you Paolo

I have been looking on your website at weather stripping. I think I have the correct part number for in between the doors. But I need to find out the correct one for the bottom of the doors. The doors are a double swinging door that measure 83.25

Here are some pictures of the doors that need the Amarlite weatherstrip replaced. The dimensions of the weatherstrip is 5/8" wide x 1/4" deep. Due to the lock on the doors, the top portion is 32 1/2" and the bottom portion is 45 1/2". It is 1/8" - 3/16" between the double doors. There are 2 sets of ... (cont.)

Do you have a faceplate (the piece that is around the lock on the door) that has weather stripping on both sides of it? I am purchasing weather stripping 58-085 for our door. One other question about item 58-085, does that come in 2 pieces or is it something you need to cut? Ours looks like it stops ... (cont.)

I just bought your long throw weather stripped face place for my entry commercial door. However, the weather strip (wool pile) doesn't stand tall enough, so it leaves a gap to the other door. It's about a 1/4" gap, which really makes a negative impact here in Massachusetts. Do you have a facep ... (cont.)

What the material and thickness of the weather strip for part numbers 79-029 and 79-030? I have a gap of 3/4 inch between doors. Is the material felt or nylon brush?

We are trying to replace a weather stripped base plate at our local American Legion Post doors. The dimensions outlined on your web site for the long and short throw base plates don

We are trying to replace a weather stripped base plate at our local American Legion Post doors. The dimensions outlined on your web site for the long and short throw base plates don

My Parish in Nebraska has two sets of Kawneer glass doors at the church entrance. However, there is no model number or other identification numbers anywhere on the doors. I took some pictures in hopes that someone could help me figure out what would be the proper weather stripping to order. The w ... (cont.)

I think your part number 58-085 will work but wanted to confirm. I have a 2 3/4" door. The channel is 1/2" Can this piece be cut in half for shipment? Also need astragal for the lock area. It measures 7 7/8"