Viewing all customer Discussions for:

90-282 Recessed Keeper

Window locks A-S PA. 9778I have eight windows with this lock. The windows were installed about 25 years ago. The locks are not working properly. When turned to lock position the arm is supposed to catch but the spring action pops the lock handle back to open. If the arm locks there is a ball tha ... (cont.)

While self quarantining, I have been doing a lot of cleaning, and while washing windows, I discovered that several were missing the cam lock keeper. My windows are Jeld-Wen double hung wood windows that were installed around 2006 when my house was built. I found a recessed keeper that looks similar ... (cont.)

Hello. I just moved into a house that came with a broken window lock. I cannot find any identifying names, numbers, or markings. From my measures, the screw holes are 2-1/4" apart and there is a 7/16" backset from the front of the lock to the screw holes. The keeper is recessed, so it is screwed per ... (cont.)

I need replacement keepers for Milgard sliding windows installed in 2001.

Hello. I have a few windows with broken sash locks. Mostly what is broken is not the rotating lock mechanism, but the other piece (on the left in my photo) that it latches into. The "tooth" on the latch tends to break. I'd like to purchase new mechanisms that include both the rotating lock and the t ... (cont.)

I need a replacement latch for Viking Window

I am trying to source the replacement parts for viking window locks. The lock measures 2 1/4 on center. We will need both lock and keepers for at least 30 windows at one hotel and several more for another property as well but different lock.

I need a replacement Viking window locking latch series 8100. Let me know if you have anything that could work. Thanks! Ryan

I'm searching for the pictures window sash locks. They are metal but I have very little info to go on for replacements. The windows are not marked with a manufacturer nor are the locks. The windows are wood with insulated glass. I'm not sure if the age. At least ten years old, I would guess. ... (cont.)

Will this lock work with the recessed keeper? I need this lock, but I need a recessed keeper. Trying to replace this lock.

So I need 6 of the 27" and 2 that are 14" on the channel balances. I'm pretty sure they are the 385 series. I need 3 of the locks, 90-077A. I found them on your website, but I also need the piece shown that fits in the window itself. I need 4 if you have them. If you don't, can you direct me to a si ... (cont.)

Looking for a replacement for this part. Do you have? Holes are 2 1/16 apart. Width of cam side latch is 1", keeper side is 1/4" wide. Both are 2 3/4" tall. Thank you, Rick Campbell. PS I need the opposite of what is in the picture which was off of a left side horizontal slide window. ... (cont.)

My sliding window has two locks - one at the top & one at the bottom. One of the recessed keepers is missing. Your #90-282 looks like the correct shape but the size is too large. Mine is definitely smaller. Can you help me?S.

Aloha from Maui. I am looking for 3 of the attached latch. It seems to be Milguard item HL0075LKWH and the keeper is HL0134KPWH. Is this an item that you carry? Or a similar replacement that will work?

Looking for replacement parts for my sash windows. The screw are 2 1/16 " apart. Need the keeper and lock. Thanks Rod S.

I need to replace the recessed window latch reciever pictured above. The distance between the screws is 2&1/4 inches. Overall its length in 3". Thank you.

I measured the part of the keeper that dips down and it is 3/16 and about 9/16 at the top

the number on the inside lock mechanism is 9872 Need the latch that locks and unlocks the window

I need the exact same parts for older Viking windows. The item numbers listed will not work. The keeper has to be flat like the one pictured. The other keeper you listed is too deep to allow the window to open. I need a sash lock that will work with the original keeper. The gray locking piec ... (cont.)

hi, Im missing three latch and keeper sets and it looks like 90-298 lock will replace the original Crestline but the 909-282 keeper is quite different than the one on my Crestline window....About an inch wider. Thoughts?!!