Viewing all customer Discussions for:

26-148 Vent Latch

My 15 year old certainteed windows have a lot of these vent latches that are broken. They are brittle from the brutal Texas sun. Do you carry these?

I have a missing vent lock. The space is 2 3/8 x 3/8. Have anything that would fit?

I am looking for Sash Stops for a Ply Gem Bryn Mawr II Slider Window, actually a number of them.

I have a Marshall sliding window which has plastic tabs that can pop out to prevent the window from being slid wide open. Both of the parts have broken such that the pop out cannot be locked in place when one wishes to open the window. There is both an upper and lower part, which look identical. Can ... (cont.)

Thanks for posting. Take a look at our 26-148. Look it over and see if you think this could work for you.

First photo is a an inside locking mechanism that won't lock in the "down" position.Second is a thin plastic piece a movable screen slides over.

These windows were installed in 1999 or 2000. The label on the side of the window frame indicates White Devon Double Hung 36.25 x 32.6875 DVDHBSH-B B02244.01 0206960027

Part 2338Can't find this part

It is plastic 2 1/4" long, 1/2" wideIs on window installed 2004. Certainteed name on a latch on another side of window.The part is located in the bottom track of the horizontal sliding windowMy photos appear to be rotated 90 degrees.

Hi,Trying to replace the vent latch locks for my vinyl replacement windows by the manufacturer certainteed (13 years ago). The measurements of the lower part of the latch (that goes into the window frame) are 2 3/8 inch length, 3/8 width and 1/2 depth. Obviously the top is a little larger 1/2 inch ... (cont.)

I need to replace the lock/stop piece in my Somerton II XO Glider window.

I am looking for this locks but not haven't been able to find them locally or common stores, need 12 of them, if you could help me to find or how to order them, thanks in advance

latches on each side of the window to keep it open a little bit. You can have your window open, but not far enough for burglars to get through.

Bob in San Bruno,ca I have several certainteed Combination Vinyl Window Vent / Security Latch similar to your 26-148 I have used a screw driver to pop out but it will not come out. Need Help..Tks Bob

I have Certainteed windows that were installed about 14 years ago and a few are in need of vent latch replacements. The existing vent latches are 3" long top to bottom. Your 26-148 latches looked like they were the ticket until I noted that they are only 2-1/2" long top to bottom. The slots in th ... (cont.)

All the vent latches appear to be 2 1/2 inches long by 1/2 inch long. We just moved into house and mist are broken

During a break in of a home, the night locks were engaged, but they lifted the bottom sash very hard and broke both night locks. Can these be replaced or must I replace the entire sash?

The STOP is broken. How do I remove and replace?

I need 6. The number I was able to get was #4,824,154 on the vent latch. The brand window is CertainTeed. Double hung and open left to right. I put a picture of the vent latch that was in decent shape as a reference. Appreciate any help you can give me.the color of windows are white too. ... (cont.)

We are looking for a replacement vent lock, see photos. Measures 2 3/8 inch long face x 3/8 wide. Hope you can help! Thank you in advance. Samantha R