Viewing all customer Discussions for:

33-017 #8 x 1" SS Philips Pan Head Screw

I t appears to be series 150 coil balance that I need to replace but do you have the anchor bracket so to speak that holds in sash , I'm not positive of weight needed but sash is small vinyl approx 40 united inches.. thank you Ron Need for job asap, thanks again !

I have a project on my old windows house. I need some parts but I didn't find on the web. Maybe you can help. What I need is some spring load spiral balances (long 27 or 28" and diameter 5/8 or 9/16"). Because it are old, they don't have any color or specifications. It is just only a metal cylinder ... (cont.)

The house was built in 1963. The windows are non-tilt, double hung wooden windows 30

I need 4 new 32 x 5/8 spiral non-tilt balances for some old wooden windows. Each window weighs 20 lbs. Would you recommend the blue tip balances or the red tipped? I will also need the "foot" or "carriers" for both windows. Thank you

I've tried several Swisco orders trying to make my windows work again. In the attached photo, the one at the end is one of the Swisco Series 400s I tried. The original is fatter, but when I tried your series 500, it was too tight, and my handyman would have to carve out the channel to make it fit ... (cont.)

I have an old window which does not have counter weights and no pocket in which to install them. The window is 36"w x 31 7/8"h and is 1 1/2" thick. It weighs 27 lb. I want to install something to counter balance the weight of the window. Would a spiral balance or channel balance be suitable? If ... (cont.)

Hi, Looking for old spiral balance spring. 27"

the spring measures 3/8 don't know what series to order it is 30" long

I have a house that was built in 1948 I am looking to replace the attached parts on 20 original wood windows they all look the same but the tube is different lengths. The tube is 28 inches long on the attached pictures Can you help me identify?

I am looking for screws to fit the metal 5/16 offset clip (product code 70-034). Would product code 70-112 screws fit these clips? Thanks

I believe I am missing the bracket that the spiral balance locks into under the sash. They are non tilting metal windows. The spiral balance matches closely to the 5/8 in 500 series with the small butterfly clip at the bottom. i tried to capture the underside where I think the bracket should go. ... (cont.)

looking for these parts? tube length is 32 inch diameter is 1/2 inch.

I am making 14 new double hung wood windows, not tilted. Top part will be fixed, just bottom part will be moving. Window size 33" X 88" Can you provide me with all parts specification which I need in addition of Spiral balances to make bottom part open. Thank you.

Hi I need replacement spiral balances. the dimensions are in the photographs and the diameter of the tube measures 9/16" (so I guess it is a 5/8" tube).

Hi, We have these two double sash wooden windows as seen in the first photo. The two lower sashes (the only ones we're concerned with) each use 2 spiral balance rods, which have become defective. We'd like to replace them but need to get new spiral balance rods. The lower sashes are 32"W x 27 ... (cont.)

Hello, I have three single-hung windows that are very old, (they don't tilt, just go up and down) one of which won't stay open any more, so I need to replace the parts. I think that what I have is the coil balance variant. Some windows have one coil, some have two... I'm sorry to say that I kn ... (cont.)

Need to replace 29"/2820 and 19"/2810 Channel balances in a 1971 house. I think they are 370 series. Will need also sash tops, capitol lock, and the two pronged clip that holds balance from the top (which I did not find pictured anywhere). Please see attached pictures and advise. Thank you. ... (cont.)

Hello, I am trying to repair four old wooden double hung windows in my garage. The windows have been inoperable for years. The mechanism for each window is some sort of spiral spring balance but they are all either snapped in two or severely rusted. The lower sashes are 12 pounds each. The to ... (cont.)

I need to replace several window frames but preserve the wooden sashes because they are in one of several condos in a historic building. The upper sashes will be permanently fixed in position and I intend to fit the lower sashes with spiral balances.The windows are grooved already, so I can route th ... (cont.)