Viewing all customer Discussions for:

58-135 25ft Bubble Seal, 3/16" x 11/32"

Hello, I am trying to find weather stripping for the casement windows shown below. There are two windows and there is no markings on the window so I do not know the manufacturer. The windows are likely about 25 years old. Thank you in advance for any help to can provide in identifying the weather s ... (cont.)

Need to replace weatherstripping for 22windows (18"x48") pictures enclosed.

Is your product code 58-135 suitable for front door (outside mount) weather sealing? Our old weather stripping has broken in several places - it has an extra "hook" and the vertical piece appears to be slightly wider than your drawing's vertical piece, but the channel width is the same and the widt ... (cont.)

Need black rubber bulb seal for bottom sash of Benjamin F Rich double hung windows

Hi Window expert: I need to replace my old window weather strip foamed. There is a hard plastic strip at the bottom of the foamed strip. (please see attached pic), I am not sure what part I should buy. The base (hard plastic T base is 3/16", the Diameter of the round foam is around 4/16-5/16"). ... (cont.)

I have a lot of these off-brand double hung windows that have sizable water leaks. The photos show the leak area that is in the corners where the bottom of the top window seals against the top of the lower window. I have a LOT of these that are 20 years old and leaking. My temporary fix, shown in t ... (cont.)

Sent over picks need seals thanks

I'm looking to replace the weather stripping on a floor door on my boat. It's from 2002 and leaks a lot. I have two additional photos I will try to send.Bill

Hello, this is a bubble style seal for 30ish year old Alcon patio door. I've tried to purchase previous bubble seals and they weren't the correct size. This seal has about a 7.5mm base (flat part), and the bubble is about 7mm diameter. Do you have something like this? Thanks, Dirk ... (cont.)

Hi - the one on the LEFT is the original (foam has corroded away). the one on the RIGHT is replacement. Note, the flange on the new one is too wide to fit in the track. Is there a similar product with a narrower flange? Maybe 3/16?

Good morning. My customer has asked that I look into replacing the weather stripping along the exterior edge of her Thermal-Gard windows. It looks like kerf mounted foam filled bubble, but I am having trouble finding an exact match. I will attach some pictures. Thanks in advance for any assistance ... (cont.)

Weatherstripping.

Would you have a seal similar to the one in the picture?

Hi, I'd like to replace the weatherstripping in my Simonton windows. The home was built in 1998 and we purchased it at foreclosure in 2003, so it's in bad shape. I've attached photos and am hoping you can make a recommendation. The bulb weatherstripping is about 7/16 in diameter. I'll send pics of ... (cont.)

What do I need to purchase to replace this?

Sliding door seal

Hello can you maybe help me to identify this parts or if you have it? It is between the sliding door and the frame from the sliding door to seal it . Thank you already for your help Sven

Hello, I need help identifying this weatherstripping. It goes on the outside of my casement crank windows. Thanks in advance for your help. Susan

Th

Hi I would like to purchase new top weather seal for my Milgard windows. The T-Bar hard plastic strip that locks weather seal in place is 3/16 inch. The bulb is 1/4 inch. The fin is 1/4 inch. Thank you for your help. Tim