Viewing all customer Discussions for:

58-135 25ft Bubble Seal, 3/16" x 11/32"

Weather strip 3/8" flexible rubber with T The T piece is 1/8" Glazing bead 1/2" The T piece is 1/8" These are off of our 1970's awning style aluminum windows. Might have been from a local company called AAA possibly.

Rubber is the vertical seal for a rear sliding window in an 80' GM pickup. I am open to a brush seal if there is one that would slide into the aluminum track and be of comparable height. Thanks

Hello, I am writing to ask if you can identify the weatherstrip shown on the attached photos. The weatherstrip runs along the bottom of aluminum, double-hung, non-tilt PGT hurricane windows installed in 2008. Thank You, James

My 1968 ptg awning windows have bad weather stripping. I'm having trouble identifying what I need to replace Thank you

Trying to replacement weather stripping

Looking to get confirmation on the correct size.

I removed this from my Gapco aluminum window. The windows are 30 years old and the weather stripping needs to be replaced. I see an image of this type weather stripping on your web page, but I do not see an option to purchase it.

I spoke with PGT directly and they do not have parts in their warehouse for this model. Can you help me? I need a casement window operator for PCT Casement Window Series 740 & 640 (numbers found on a silver label inside the window). Window color is white.Photos are attached.In addition to the ... (cont.)

white 1/4 bubble seal 1/8 slot in window

Windows appear to be as aluminum although builder literature says they are vinyl. T slot for seal . Plastic piece is 3/16 inch wide with a 1/8 inch extension to bubble. Bubble seams to be 5/16 inch around with 2 "legs" that extend and flatten out against sill plate under bubble when window is close ... (cont.)

To whom it may concern, I'm trying to wrap up a project and this window has failed during our last rain storm. I'm not sure if it just needs new weatherstripping or something more serious is to blame (i.e stucco and waterproofing) Please if anyone can identify this weatherstripping and point me i ... (cont.)

That is the one of doors I need for 6 of them

I have about 20 windows totaling about 50-60'

i have a french door exterior the attached image is my seal demintions. 3/8 round x 5/16 plastic edge to slide in track on aluminum when door closes.do you sell one of these it is appx 82 inch legith

Hi, I am looking for two items for an ENTRYGARD TRUTH window in WHITE: - Window crank cover - Weatherstripping. I believe it is of the "vinyl glazing bead" type. I think it is 1/2". I have enclosed pictures of each item and an overall picture of the window. Thanks for your help Ray ... (cont.)

Hi I'm looking to replace the weather stripping on the windows in my house. They are Croft aluminum windows from around 1998. The seal seems to be about 5/16" diameter with approximately a 1/16" spine. Thanks for your help , Mel

Can you help me with replacing this weatherstripping? One is for sliders, the other is for French doors.

I have a couple units in a 1969 condo and the weatherstripping needs to be replaced. Please see the photos below and tell me if you have replacement material available

Please reference the pictures to see if you can help us identify the correct insulation to order. They appear to be 5/16" and there's a piece of felt that remains in the groove on the window, which has be separated from the white strip provided. Thank you! Barry & Peggy

Do you have a window seal part like the pictures below? The round part has to "fins" on each side. Thanks, Michael