Viewing all customer Discussions for:

58-135 25ft Bubble Seal, 3/16" x 11/32"

Windows appear to be as aluminum although builder literature says they are vinyl. T slot for seal . Plastic piece is 3/16 inch wide with a 1/8 inch extension to bubble. Bubble seams to be 5/16 inch around with 2 "legs" that extend and flatten out against sill plate under bubble when window is close ... (cont.)

To whom it may concern, I'm trying to wrap up a project and this window has failed during our last rain storm. I'm not sure if it just needs new weatherstripping or something more serious is to blame (i.e stucco and waterproofing) Please if anyone can identify this weatherstripping and point me i ... (cont.)

That is the one of doors I need for 6 of them

I have about 20 windows totaling about 50-60'

i have a french door exterior the attached image is my seal demintions. 3/8 round x 5/16 plastic edge to slide in track on aluminum when door closes.do you sell one of these it is appx 82 inch legith

Hi, I am looking for two items for an ENTRYGARD TRUTH window in WHITE: - Window crank cover - Weatherstripping. I believe it is of the "vinyl glazing bead" type. I think it is 1/2". I have enclosed pictures of each item and an overall picture of the window. Thanks for your help Ray ... (cont.)

Hi I'm looking to replace the weather stripping on the windows in my house. They are Croft aluminum windows from around 1998. The seal seems to be about 5/16" diameter with approximately a 1/16" spine. Thanks for your help , Mel

Can you help me with replacing this weatherstripping? One is for sliders, the other is for French doors.

I have a couple units in a 1969 condo and the weatherstripping needs to be replaced. Please see the photos below and tell me if you have replacement material available

Please reference the pictures to see if you can help us identify the correct insulation to order. They appear to be 5/16" and there's a piece of felt that remains in the groove on the window, which has be separated from the white strip provided. Thank you! Barry & Peggy

Do you have a window seal part like the pictures below? The round part has to "fins" on each side. Thanks, Michael

Hi, I need help finding a replacement for the vinyl glazing and bubble seal for my patio door (pictures attached). I am unable to determine who the manufacture was. Thanks, Lucas

the top of the T-slide is 3/16" and from the bottom to the top of the leaf is 9/16.

I believe the existing windows are Jeld-Wen. I am looking to source pile weatherstripping for the cross rail, bulb type weatherstripping for the sill and a new compression jamb with internal spring balance. The compression jamb has a failed spring on one side. The jamb is 3-3/8" wide by 73-1/2"/74- ... (cont.)

I need help identifying and replacing the seals needed for my windows (they are ~21 years old vinyl single-hung). As you can see, I am getting condensation because they are not working anymore. I cannot find a way to remove them and I would need help figuring that out as well. I have tried to inc ... (cont.)

I have 2008 kolbe manor outswing patio doors. need to replace the weatherstripping on the vertical astragal piece.

Where can I get this bubble weather stripping? I need about 100 feet. This came off an unknown brand aluminium storefront door thanks

Have bay windows with the jel-n-203 sticker, needing new bottom seals for the lower window, The windows are wood frame, double hung.The seals are a "T" shape with a bulb seal, that press up into a slot in the bottom of the window.Are these parts available from Home Depot or Lowes???Thanks for any h ... (cont.)

Hi I'm getting leaks inside the trailer when it rains and need to replace the silicone weather seal around the windows. The current weather seal has water pooling underneath it. I also need regular bubble weatherstripping for the door. I don't want to mail it on the door. The window strip is 5/16" o ... (cont.)

That's a bit of picture I don't know