Viewing all customer Discussions for:

58-135 25ft Bubble Seal, 3/16" x 11/32"

Have Danvid windows with aluminum frames, bronze color.Windows that open have side pistons.

We need to replace several of these seals. They slide in. Many have worn out over time. Easy to replace of I have ones that fit.

I got the balance springs in and it's really tight. It's sort of chewed up the lower section. Maybe I need the other smaller ones. I ordered S380 Also ? do you guys sell weather stripping that goes at the bottom?

Can I use 58-156 instead of 58-135. It's for a storm door but I don't like the hollow seal In the old seals

Please see photo to help me identify a replacement for weather stripping on my windows. The picture is of existing weather stripping I am replacing.

Attached are photos of what I am looking for. It's for a wood double door, and is the vertical strip that attaches to the piece where the two doors come together It has a track.

Have aluminum frame crank windows, seals are brittle and need to replace. 5 sets of 4 windows, about 16lf seal needed for each, about 90lf total.Seal images attached. Is there a replacement? Thanks

Can this be replaced,and how easy is to do ,thanks have a great day.jupo

The kerf is 0.23" wide at top of T and T height is roughly 0.1" above the bulb. Bulb section as shown is oval at 0.35" by 0.2". It is assumed this might have been round. Has double fins for additional sealing as shown

I need 6 feet of this type of bubble seal for screens on which I have put on new fabric. The best that I can discern is that the diameter of the 'bubble' is 1/2" and the 'T' is 1/8" on the base and 1/16"between the top of the 'T' part and the bubble part. Do you have something that fits this desc ... (cont.)

Bulb weatherstrip. Pella calls it 0DFF0000 - PCS Frame Weatherstrip 36" long. The "bubble" is about 3/8" diameter. The tube is hollow, smooth plastic. This piece attaches to the bottom of the door and slides along the threshold when opening/closing.

Can you help me with these parts. Two balance springs, two shoes, two pivot bars and two top latches. The house was built in 1979.

Hi - looking for replacement seal for 'in channel' type of bubble seal - of course my terms could be all wrong. I have 2 pictures I can send you. Thank you! -m

looking for replacement foam filled bulb seals for MW windows. the t slot measures 3/16" bulb is 1/4" color white TIA frank

This is the seal around the door of an old Winnebago motorhome. I believe it is the 9/32 x 9/32 bubble strip. I need about 35 feet of it.

This is door weatherstrip for a Custom cottage ice house. They are no longer in business. Can you supply something close to this. I need about 20 feet. Thanks Gary

I am looking for this brown color bubble weather seal for my door. The width of the T-channel is 3/8". The height is about 3/4 of an inch. Please let me know if you have it available.

HELLO, I AM LOOKING FOR A GASKET / SEAL FOR THIS TYPE OF DOOR. THANKS JONATHAN

Hello, We bought a house built in 1965. Has Lokmaster windows. The windows are not closing securely - there are gaps and I am wondering if there is anything I can do about this? For the slider - I am having trouble locating one that is the same size and fit as this one. Doe you have a parts pa ... (cont.)

Patriot windows installed 1999 Bubble seal 5/16" Tee slot 3/16