Viewing all customer Discussions for:

58-182 .187 T-Slot Foam Filled Bulb Weatherseal,12ft

I think the windows are by Jen Weld but not sure, not original home owner

Can you help me identify the bubble seal and wool or felt seals ? The bubble seal seals the bottom double hung vinyl replacement window to the sill. The felt stuff seals the outside bottom of the upper window to the screen to prevent flys and bugs from getting in. This particular seal does not sl ... (cont.)

the "T" dimension is approximately 17/64th" across the top of the "T". The bulb is heavily compressed but appears to be approximately 20/64" in diameter

Please help me identify and replace this vinyl window bottom sash seal. Below is a picture with dimensions of the seal that is attached to my lower single-hung vynl window sash. I would like to identify a suitable replacement seal and would be ordering enough for all seventeen windows in my home. ... (cont.)

I believe the .187 t-slot foam filled bulb seal will work. Please verify

Need this bottom window seal. See attached picture

img-3834 is for single hung window bottom seal img-3835 is for the sliding vinyl door

If you have the T-seal great if not could you tell me the size of the seal

I'm looking for replacement weather guards for Accu-Weld double-hung 24" vinyl windows. This part is a single assembly consisting of a T-shaped plastic runner that slides into a groove on the window and has a rubber gasket attached. They're for the bottom windows only. Mine are deteriorating and won ... (cont.)

Trying to determine the correct weather stripping. Bulb diameter is 3/8 of an inch. Base Ext length is 1/2 an inch. We think it might be 58-182 or 58-171. What is your thought? Thanks

Good Morning, Alside Windows apparently does not honor their "Lifetime Warranty", claiming it is a "Limited Lifetime Warranty" Anyhow, I am trying to replace the damaged weatherstripping on all 10 of my windows. I see you have .270 (58-171) and .187 (58-182) bubble seal available. I just want to mak ... (cont.)

I'm looking to replace this

I don't have a model number but the windows were installed in 2003. All of the windows have this piece hanging. It is the top window, outside. Can you identify the part so I can order replacement.Thank you

Foam 5/16? ?Leg? 5/16? Fins 1/4 hard plastic

Please let me know which is the part number I need. Thank you.

The insulation strip on the outer bottom of the capital windows needs to be replaced and have been trying to locate the part. My windows were install 2000-2001 timeframe. Any help would be appreciated.

I'm looking for lower sash bottom weather stripping for gorell modell 5305 double hung replacement windows. Gorell is out of business I think the part number is 58-182. If possible please confirm

I think this may be your 58-171 or 58-182. Do you have any other ideas?

I thought 55-055 would be the correct replacement...close but no cigar. The window has a "T" channel. Do you carry anything similar that will work with CertainTeed windows? Approx 18 years old. T channel is 3/16 wide. T to tube base height 1/4"

Seeking this window sealer