Viewing all customer Discussions for:

58-182 .187 T-Slot Foam Filled Bulb Weatherseal,12ft

This is a seal located at the bottom of my windows.

I am looking at product code 58-183 as a replacement. What is your thoughts.

I think the windows are Mi Windows.Cannot find tags on the windows. Home was built in 2001 I think .187 T-SLOT OFFSET HOLLOW FOAM SEAL,12FT Product Code: 58-183 will work but not sure.

Looking to replace the stripping on all my windows. I have attached photos of the existing weather strip that's installed in my windows. Hopping you guys have a match. Please advise. I did not find any numbers or markings on it.

Windows were made by MI in 2009 for previous owner. Attached is a small section I salvaged shown in two pix. One is the face on view as it would look installed at the bottom on the sash in the groove. The other is the cross section. Rulers should help with identification. Thanks Vince ... (cont.)

i have 10 windows of different size you sell by foot?.

The old weatherstrip is disintegrating. Off of SuperSeal double hung vinyl windows. Thank you.

Diameter f bubble appears to be ~1/4". Height of attaching point ~3/16".

Need to replace the weatherstripping on my Windows. It has become brittle and falling apart. Sending photos of what is on there but not sure which size to order. You have two the .270 T-slot or the .187 T-slot filled bulb weather seal. Can you tell by the photos I sent which one. What is your retur ... (cont.)

H-R20 48x78 H-R30 36x64 AAMA/NWWDA 8500/850

Hi: I hope the pictures turn out because I haven't the Foggiest what I'm doing. I have more photos.

I have about 22 windows installed 14 years ago and I find that the bulb seals (at bottom of each window) all warped and brittled. I want to replace at least a few windows immediately. I have taken pictures (attached) and measured the diameter of the bulb ~ 0.25 inch, and the dimension of the kerf ... (cont.)

The first three photos show pieces I have cut frim the weatherseal strip that is on the bottom (at sill) and middle of the outside on double hung windows. The little strip that goes into the rail seems to measure about 3/8" but could be 1/4". I also have the smaller weatherstripping shown in the ... (cont.)

I need a hollow T-slot replacement weatherstripping for a houseful of windows. From

Can you help me find a window spline that will fit my window. I have attached a scan (cross-section) of the part for your information. Chris

I have Alside Excalibur windows and the bottom weatherstripping is deteriorating. I have taken three photos of the strip. It is quite different from the ones I have seen noted your site, but I hope you have something that will work as a replacement. I have 23 windows that need attention. ... (cont.)

I have a T Slot Bubble Seal with approx. 1/4 inch bubble and 7/16" T. Would like to confirm that I need the 58-171 product

Looking to find size .The Foam is 1/4 The back pat of insert is 3/8

I ordered window gaskets last year ...is there a trick to getting it to stay in the slot that it goes into..cleaning the windows today and it kept popping out thank you Tammy

I am interested in replacement weather seal,and need to verify a viable match. I believe 58-182 may be the closest. The dimensions are about: A