Viewing all customer Discussions for:

58-182 .187 T-Slot Foam Filled Bulb Weatherseal,12ft

I need a hollow T-slot replacement weatherstripping for a houseful of windows. From

Can you help me find a window spline that will fit my window. I have attached a scan (cross-section) of the part for your information. Chris

I have Alside Excalibur windows and the bottom weatherstripping is deteriorating. I have taken three photos of the strip. It is quite different from the ones I have seen noted your site, but I hope you have something that will work as a replacement. I have 23 windows that need attention. ... (cont.)

I have a T Slot Bubble Seal with approx. 1/4 inch bubble and 7/16" T. Would like to confirm that I need the 58-171 product

Looking to find size .The Foam is 1/4 The back pat of insert is 3/8

I ordered window gaskets last year ...is there a trick to getting it to stay in the slot that it goes into..cleaning the windows today and it kept popping out thank you Tammy

I am interested in replacement weather seal,and need to verify a viable match. I believe 58-182 may be the closest. The dimensions are about: A

Looks like your 58-182 . Are there any special instructions for old removal or install. Is the bubble seal suppose to extend past the window frame at all.

This is a foam filled bulb type weatherstrip from vinyl replacement windows purchased from Lowes in the fall of 1998. The bulb is about 5/16" The part with the barbs that attaches to the window is somewhat deteriorated but there is 7/16" remaining. From the top of the bulb to the lowest barb is ... (cont.)

This is the bottom seal of my window. I believe it matches the 39" DUAL-DUROMETER WEATHERSTRIP but am not sure. The window is 25 inches long.

I will need about 100 feet of a similar profile. these are 20 year old diamond windows. please email with any questions

I plan to refresh 20 windows and experimenting with first. I have determined I require the flowing for each window. 1) 5 sections of pile weatherstripping 3/16 x 1/4 2) .187 T-slot foam filled bulb I need advice for removal of pile weatherstrip section where it interlocks top sash. It seems to ... (cont.)

Hello,I am looking for weather stripping for my ModernView Series 100 vinyl windows. I believe that the stripping I need is called "T-Slot Foam Filled Bulb Weatherseal" however I do not know exactly what size it is. I do not have a measurement tool which indicates mm so I attached some sample pictur ... (cont.)

Hi, I just ordered 48ft of the weather stripping "58-182" PERFECT MATCH!!! I could also use two replacement upper panes for my single hung windows, but my %^!$%$# house builder pealed off every label leaving absolutely nothing to identify the window's maker and refused to tell me the names ... (cont.)

Hi, I am looking for parts for my windows. I wonder can you help ? Thank you for posting Youtube videos. Regards, Chun-Lung Lim

I have tried to measure this and I come up with the T-Slot being 3/16 and the foam fill being 3/8 the over all width is 5/8 I do not know if i have measured it correctly. Have ten (10) windows to do. can you tell me the right product to use and give me a price with shipping. Thank you , Tom ... (cont.)

The part needed is for the outer edge of the bottom sash of Gorell windows. See the two photos. The bubble is 1/4". The stripping is T-shaped, with the outside strip at 7/16", the inside strip at 3/8" and the depth at 1/8". I will measure the quantity needed if you can supply this part. Thanks for ... (cont.)

The T Slot is 0.187 inches. Color is white. It has the little J into the foam. The foam seal is about 0.30 inch. It does not have the little wiping strip below the foam. I need about 50 feet in white.

I am trying to locate a, replacement, bottom weather seal for this window. The company has gone out of business. I am attaching a picture of the current seal which is torn into 2 pieces, not real clear. If needed, I could send a sample of the old seal. Please advise. Thank you, Jim Pic ... (cont.)

My window has wool pile and bubble seal. The wool pile currently measures 3/16 x 5/32, but it has been flattened a bit. Should I move up to 3/16 x 3/16? The bubble seal has a diameter of 5/16. It runs along the bottom edge of each window in the double hung unit. Not sure what kind to choose. ... (cont.)