Viewing all customer Discussions for:

58-182 .187 T-Slot Foam Filled Bulb Weatherseal,12ft

Just started replacing balance rods from Swisco with help of your video. My top tilt latches are also failing and need replacing. As well my weather strips at the bottom of the Windows needs replacing. Can you assist me with proper replacement part numbers. The pics below I hope are helpful. Tha ... (cont.)

Trying to find replacement window weather stripping. As best as I can measure, Bubble/Foam about a quarter inch Extension 3/8 - Top of I-Beam section extending away from the bubble/foam. T section 1/8 - Small section connecting top/bottom of I-Beam Base 1/4 - Bottom of I-Beam section furth ... (cont.)

I am trying to replace the Wool pile and kerf mount bubble. I believe I have the correct ones. My next problem is the bottom weather strip. Attached is pictures of the weatherstrip, the part that fits in the groove also shown is 3/16. Since I am unable to locate on website, is possible for a sub t ... (cont.)

Checking out options I think this the .187

Product Info: Type: Double Hung Series: 3500 MI Windows Date of Purchase: 11/01/2000 Do you have such a part that seems somewhat adhesive. Not sure if it snaps into a slot.

Do you by chance have this type of weather stripping? This goes on the bottom of my windows. It is extremely brittle. I think the oval shape should be round. I appreciate any help. Thank you Mitchell

Im trying to find a replacement seal for capitol windows.

looking to replace on 9 window's

My vinyl windows need to have the seals replaced. I am fully capable of doing this, but cannot find the correct seal anywhere. Are you able to tell me what I need based on my picture and possibly send samples? I would really appreciate any help. Thank you. My name and address are as follows: Jose ... (cont.)

One strip is on lower sash and one on upper. Will your 58-182 work? See picture for measurements and photo.

Will the product code 58-182 and 58-183 fit and seal the same window. If so, which seal is considered the best to use. My original windows appear to have the 58-182.

I am trying to replace all of the seals on the windows on my new home. there are no identifying marks on the window so i don't know the brand. These strips have all cracked and are hanging down when the window is open. They slide into place. There is foam in the circle and also in the strip abov ... (cont.)

I have no markings on the Windows at all.

Hi. Bought my windows from a company who is now out of business. I took pictures (attached) with a ruler next to it. There is some info on the inside of the window casing but I'm at work right now and don't have that info. I think it is a foam filled offset bulb. Looking on your site I think ... (cont.)

Do you have any weatherstripping to fit my Acorn double hung windows. The dual durometer seal is on the bottom edge of lower sash of double hung windows.

this is a bottom seal on a double hung tilt window. it looks like a bubble seal of some type. the part above the bubble looks to be about a half inch and the bubble itself is about a half inch.

Just purchased a house built in 1997 with Alenco AL windows. There is a problem locking every window in the house. They all close but need to go another 1/8" or sometimes less for the lock blade to fit into the locking groove. You can force them shut, putting enormous pressure on the upper frame ... (cont.)

Replaced my windows in 2005 with vinyl double hung Windows with half screen. Noticed that my weatherstripping at bottom of window has deteriorated from weather. Where can I get replacement

The bulb-type weatherseal on these windows is falling apart. I believe your 3/16" T-slot foam-filled bulb weatherseal, PN 58-182, will be the correct replacement. Please review the attached pics and drawing to confirm this for me. The extrusion is a little different than that shown in your on-lin ... (cont.)

I need part number of this weather-strip. I thinks that is for a Keller window