Viewing all customer Discussions for:

58-182 .187 T-Slot Foam Filled Bulb Weatherseal,12ft

Will the product code 58-182 and 58-183 fit and seal the same window. If so, which seal is considered the best to use. My original windows appear to have the 58-182.

I am trying to replace all of the seals on the windows on my new home. there are no identifying marks on the window so i don't know the brand. These strips have all cracked and are hanging down when the window is open. They slide into place. There is foam in the circle and also in the strip abov ... (cont.)

I have no markings on the Windows at all.

Hi. Bought my windows from a company who is now out of business. I took pictures (attached) with a ruler next to it. There is some info on the inside of the window casing but I'm at work right now and don't have that info. I think it is a foam filled offset bulb. Looking on your site I think ... (cont.)

Do you have any weatherstripping to fit my Acorn double hung windows. The dual durometer seal is on the bottom edge of lower sash of double hung windows.

this is a bottom seal on a double hung tilt window. it looks like a bubble seal of some type. the part above the bubble looks to be about a half inch and the bubble itself is about a half inch.

Just purchased a house built in 1997 with Alenco AL windows. There is a problem locking every window in the house. They all close but need to go another 1/8" or sometimes less for the lock blade to fit into the locking groove. You can force them shut, putting enormous pressure on the upper frame ... (cont.)

Replaced my windows in 2005 with vinyl double hung Windows with half screen. Noticed that my weatherstripping at bottom of window has deteriorated from weather. Where can I get replacement

The bulb-type weatherseal on these windows is falling apart. I believe your 3/16" T-slot foam-filled bulb weatherseal, PN 58-182, will be the correct replacement. Please review the attached pics and drawing to confirm this for me. The extrusion is a little different than that shown in your on-lin ... (cont.)

I need part number of this weather-strip. I thinks that is for a Keller window

I have Jalousie Windows with t slot bubble seals . They are 3/16 t slot width and 1/4 inch dia .. You have a t slot that is 3/16 x 3/8 # 58 135 . Do you have the 1/4 and if not do you think the 3/8 dia will work ok . attached is photo of the existing bubble seal . I used my vernier to measure the di ... (cont.)

The windows were manufactured in 1991/1992 by Permaguard of Largo, Florida. We understand they are no longer manufactured by the old Permaguard company. A man from a different "Permaguard" company suggested that your part # 58-182 would help us, but when I typed it in your search, the .187 T-slot ... (cont.)

The bottom weatherstripping on every window in my house is dry rotted and solid like plastic. It's causing the windows to not close entirely and it won't latch. Here are pictures of what it looks like. The window company is long out of business and I need to replace it so I can close my windows prop ... (cont.)

The weather stripping at the base of our windows is falling apart and I need help identifying the vinyl weather stripping for our windows. I do not know what make/model windows we have. They are original windows and would have been installed in approximately 2001/2002. The photos I uploaded inc ... (cont.)

I purchased T.270 foam weather stripping item#58-171 and the plastic that slides into the slot on window is to large. Does the T.187 item# 58-182 have smaller plastic strip or is that the foam size?

Hello, I just replaced all the window seals with your 58-182 and it worked well. On my windows qty(23) the upper window or sash is fixed. In the photo it shows the seal between the windows. MI ( the manufacturer) says that you have to dismantle the upper window in order to replace that seal. Do ... (cont.)

My windows is from MI. I see your 58-183 looks very similar and 58-164 also look similar but without the foam. Will the 58-183 work for my window?

The weather strip broken into two pieces, can't the whole piece measured. Please help me identify the type.

Is your T-Slot Foam Filled Bulb Weatherseal, vinyl or silicon? If it is vinyl then will it stick to latex paint?

What is the secret to installing the T grove bubble seal. Holy cow what a pain in the @#! Got any helpful hints?