Viewing all customer Discussions for:

58-182 .187 T-Slot Foam Filled Bulb Weatherseal,12ft

Do you have any replacement window weatherstripping similar to this? It goes on a Danvid brand vinyl single hung window manufactured in 2000/2001. I have also attached the window manufacture sticker if that helps. Thanks Steve

I am looking for slide in bubble weatherstripping that slide in bottom sash. App measurement are bulb 5/16 of an inch. Two edges are appx 3/16 and 1/8 inch. Distance between two edges is about 9/16. Also attaching images.

Hello Swisco! I have vinyl windows (I think the brand was Carefree) in my home and the bottom sash has this "t"slot bulb seal. I need about 20' to replace on many of the windows where the bulb has ripped off. Let me know. Thank you, Mike

I was looking for this seal for a window I was wondering if you have it.

I need to replace the bubble seals at the base of my windows in the house we just bought. They appear very similar to the 58-182 you stock except for being slightly smaller in every dimension. Your 58-182: 7/8" overall height, 3/16" T-bar width, 3/8" foam diameter My unidentified strip: 5/ ... (cont.)

I need the Bubble Window Strip on the Bottom of the window in White 519 inches of it. I also need the wool pile weather strip in with or gray 1526 in of it. I do believe it is 3/16

This weather seal slides into a channel on the front face of the window (Mfg = unknown). When installed correctly, the seal is formed by the foam filled tube section of the weather strip. The piece measures about 3/4" inch from top to bottom and about 5/8" from front to back. the bit that fits into ... (cont.)

58-171?

need weather strip

Please see attached photo of a window seal that I am trying to replace. I believe I have identified this weatherstripping on your website. I believe it is the .187 T-slot Foam filled bulb weatherseal. The t-slot on my sample is 3/16". The bulb is approximately 3/8" diameter. The total height of t ... (cont.)

I'm looking for replacement window bubble weatherstrip. Current seal is T slot foam filled. T is 6/32", bubble 10/32", and height from top of bubble to top of strip is 13/32".

Looking for some help on which product to purchase.

Hello, I want to replace the T-slot foam seals on the bottom of my window sashes. Image and sketch attached. "Q-LON" is printed on the weather strip. This appears to be Part No. QET 4001 from the Schlegel website. Can you provide that weather strip or a suitable substitute? Thank you. Geoff ... (cont.)

Please help me find a match. I am measuring 3/16" for the tee and the bubble.

Good afternoon. I have a foam filled weatherseal with a 3/16". It's very similar to the 58-171 weatherseal, but has the smaller slot. Would you be able to help me locate a replacement for my 3/16" T-Slot foam seal?