Viewing all customer Discussions for:

58-183 .187 T-Slot Offset Hollow Foam Seal,12ft

Can you tell me what product code need to replace the seal in the picture. These are superseal windows installed in year 2004. Thank you very much

I have about 12 windows that need this insulation strip on the bottom of the front sash. Gorell vinyl replacement windows from year 2000.Thank YouTom

If I send you a picture of my window seal can you identify it

Trying to identify for the window in above picture. Think it is your product code: 58-182

Hi, My Simonton double sash windows are in need of new weather stripping. Please review provided pictures and recommend weather strip replacement. Thank you.

This slips in the bottom of the sash on a single hung tilt window.

I am looking to replace weatherstripping for old certainteed windows. I tried 58-164 and 58-171. The T-Slot is 3/16". I am having trouble with the bubble/foam part being too large and the windows will not close properly. Any suggestions will be helpful. Thanks!

We need to replace the weather stripping on our windows.

We recently purchased a house with single-hung, single-pane, Alenco aluminum windows that have no visible number and need to replace the white vinyl glazing beads, weatherstripping on the bottom sash, and some of the channel balances. In order to remove the sash, it appears a part above has to be un ... (cont.)

this weather strip came off of a simonton single hung window. can't seem to locate a retailer that handles their product. The windows are out of warranty. window # is 5068868010001.

33 1/2 inches window width The bubble seal was about 3/4" see pics with ruler for reference, best I could do.

Need to confirm. My photo looks slightly different from pictures on your site. The weatherstripping I have is a .187 t-slot. However, the foam bulb is closer to 3/8 inch or .375 diameter. In addition it appears an angled piece comes off the picture you posted, versus no angular piece on my weath ... (cont.)

Bought window in 2002 from Carter Lumber, local company. No manufacture info can be found on window. Looks like it may be your part number 58-183 ? What are your thoughts?

Hi looking at your online pics I see three bubble seal that are close:# 58-171# 58-182# 58- 183.Can you suggest the best one to use?

Hello,Trying to identify this part. The bottom of the window connects into this for opening and closing. Pic2 is the broken piece, Pic1 is the other side of said window. Right now the window will not stay open due to the breakage. Hoping you guys can help.26B BS1 ELThank you..

We need black or bronze.at least 40 inches wide.i see a product on your site that is close,but it is white.product code 58-183.if you could help me out I would appreciate it.Thank you,James

Do you have this strip for my windows Thank you Michel

I am having a very difficult time and trying to locate a bulb type weatherstripping for my home the code is MTL-4 and the series # 155/255/355. Any help you provide is appreciated

We have Simonton windows that are 17 years old. The weather stripping needs to be replaced on all of the windows. I'm thinking that the 58-187 is the correct choice. Please confirm.

My name is Harold (Larry). I am enclosing five photos of a window sash that has the bottom seal deteriorating. The seal strip slides into a shallow, narrow grove on the outside face of the sash. The sash is white vinyl. I don't know the manufacturer, but one photo shows the label on the edge of ... (cont.)