Viewing all customer Discussions for:

58-183 .187 T-Slot Offset Hollow Foam Seal,12ft

Hello,Take a look at our expert's recommendations to customers with the same hardware here. Your pivot shoe is no longer being made but our 15-175 or 15-177 could be used as a replacement, which are both used with the S152 coil springs. As for your pivot bar, start by comparing the dimensions and of ... (cont.)

Can you help us find this. Our home is 20 years old? This is the bottom stripping. Thank you Eileen

I need ten rolls of the 25ft of this weatherstripping Three right hand latches and 2 pieces of 8ft leaf weatherseal.

Based on your video - the measurement from the base of the bubble to the top of the channel piece is 3/8" tall and the bubble is about 3/8 as well but it could be compressed due to age. What should my replacement be?

Roughly 3/4 of an inch from top to bottom and circle is 1/8 inch across

I need to replace the weather stripping on my 20+ year old windows. They are dry rotting and not working correctly.

Pivot ---- This part slides into the bottom of the window to allow tiltig the window in for cleaning or removal. Weatherstrip ---- This is the weather strip that slides into a channel on the bottom of the window

I purchased 58-183 but the strip I need to replace has different sized edges on the t-rail, I hope you can see in the close up photo. The width of the "T" is the same, but the post of the T is off to one side. I'm not too concerned with the weird shape of the foam, just need it to fit the rail. The ... (cont.)

Greetings,I am trying to identify th manufacturer of my vinyl replacement windows so I can find the weather striping that goes on the bottom of the lower sash. The windows were installed in June of 2000.The locking hardware has "Prism" on it and I have included a picture of a sticker that is on the ... (cont.)

the rubber seal is foam filled and appears to be .300 in across. The retainer part is 3/16 inch wide and the base the bubble attaches to is 1/2 across.

Hi, I need a replacement for my Simonton window bottom weatherstrip. I have attached a couple pictures with measurements. Thanks in advance for your help!

I have replacement windows with some worn out weather stripping. Attached is a picture. Thank you.

Looking for parts simonton windows

I'm looking for about 30 ' of weather strip. Picture is attachef

The balances in my Simonton window are broken. I attached a picture of the window description from the original house plans, in case any of those numbers help find the right parts. The numbers on the coil we pulled out are worn. It looks like "5.0 35 08..2924". The track is about 9/16 inch deep. Do ... (cont.)

Need to replace these seals on several windows current ones are dry rotted.

Hello, can you please tell me if available what i halve circled around?

What would you recommend as a replacement for the weatherstrip for the window bottom of my 19 year old home?

Is this the 58-183 seal? On a bathroom window.

This weather stripping is from a Andover double hung window. It measures 5/8 and the tee part is 1/4 inch and 1/8 thick. The tee snaps into the bottom side of the window.