Viewing all customer Discussions for:

84-107 SS Spring Tension Screen Door Roller, 1" SS Wheel

Hello, I have an aluminum patio door w/aluminum screen. It is in Hawaii on a northerly shore, the door facing east to the predominant weather, & the intense rain & salt-water air has corroded the screen roller metal track at bottom. We pounded in place atop the existing track an extender tra ... (cont.)

I need to replace my screen door rollers again (5 years) due to rust from living near the Gulf. The roller type is the M spring type 84-001, or 84-031, or 84-007. The screws used for tension are also rusted. Is there a roller and screw that you could recommend that may not be subject to quick rustin ... (cont.)

Please see attached some photos of a screen door wheel that we pulled out of a working screen. We have a couple of screen doors where the wheel does not seem to have any spring action left and we would like to replace them. You have a few different options on your website - could you please recommen ... (cont.)

Here are the parts I'm looking for, holes on handle are 3-3/4" on center The bug strip was fiber it fit in 1/8" x 1/8" groove in the door thanks

Would you please help me to identify the correct replacement parts for the rollers and handle for my sliding screen doors? Thanks in advance for your help with this

I am looking for Jeld Wem screen door repcement wheels and cannot find them so far. I really need to have them replaced

Ineed 24 of these

The first two photos are of the top of the door, the 3rd and 4th are of the bottom. The bottom 3rd pic does not rotate, the 4th does turn but does not protrude below the door. The top rollers are fine. But there is no screw holding them in place. They seem to be in a slot in the frame. I don't ... (cont.)

I don't see any markings on the screen door. I can send photos of the French door if you need. There is an adjustment screw on the side, but removing it doesn't loosen the roller. I have seen YouTube videos where you can pry the roller off the retaining clip, but this roller is spot welded to the ... (cont.)

Two are missing (from bottom of door) One is unattached, the other is still in place but I cannot get it out, even with screws removed. It appears to be a 84-005M or 84-102, but since there is no bar attached to the one that is loose, it is anybody's guess what it might be. And since I cannot remove ... (cont.)

I need 2 adjustable bottom rollers for the above mentioned screen. Pics included. The door is nearly 20 years old.

The rollers on my door appear to be 84-107. According to your video for 84-001 which h appears to be the same with smaller wheels after taking out the adjustment screw pull out the old part by grasping the wheel with needle nose pliers. Problem maybe you can help with..what if the wheel breaks off ... (cont.)

Hello, I ordered SS Spring Tension Screen Door Roller, 1" SS Wheel part# 84-107 8 each Yesterday when I tried to replace those rollers, I found out your SS Spring is about 1/4 longer than the one inside my slide door. The M Spring is too long. Therefore I can not install it. Is there a way can I ben ... (cont.)

I'm looking at item 84-001. Does this type come in a stainless roller since I live near the ocean.

I ordered part 84-057, but the bolt sticks out too far and the wheel will not fit back into the housing (or whatever you call it that the wheels fit into at top of door to slide around). I need a 1" wheel that is 1/4" thick that has an inset screw or bolt that won't stick out. The first picture sh ... (cont.)

Is there a better option to the "M" spring roller? My existing roller is the "M" type, 1" steel.

I am trying to determine which part would work best as a replacement. I will likely order 8 as we have 2 doors. The house was built in 1960, but I'm not sure the doors are that old. They are several years old as they are metal, not the white/plastic or other common colors. The wheel is 1" but plasti ... (cont.)

Screen door rollers : Do you have item# 84-001 with a stainless steel spring? Or one that would work for this application, in stainless steel. This regular item is rusting out in a matter of months, at the ocean front property we are managing. Thanks for your soonest reply. Tom