Viewing all customer Discussions for:

26-194 RH Rollyson Tilt Latch, 2-5/8"

My window is a 100-85 series 2000 & I need a left tilt latch. It measures 1 5/8" across.Not sure I know how to remove it to get a better photo

I have a faulty window that has a broken parts that help to hold up the window when pushed up. The part on the right (the rectangular one) has the number 200-794, while I couldn't find any markings on the left. Unfortunately at the time I can't get pictures of these pieces when installed. Thank you ... (cont.)

I'm looking to replace an Insul-Sash Tilt Latch Do you have a set that will work?

For Imperial Window. Screw holes are 2 9/16 inch apart. Width is 7/8 inch

Can you help me verify what parts these are and part numbers so that I can order the replacements.

Looking for a Tilt Window Latch to my existing windows. Attached is a photo.

Looking for a Tilt Window Latch to my existing windows. Attached is a photo.

these windows are over 20 years old please help if you can there ALENCO tilt latch. Thank You

Hi, looking for a left tilt latch as pictured. Have not found any brand on window or part. Window is in Michigan. I am in Colorado, so this is all I have. thanks, ricky

There is no marking or numbers all I now screw holes are 2 5/8 apart 3 1/2 long 7/8 wide

The windows open and slide up. They slide fine but the inspector called them out on our escrow because they wiggle back and forth. Home was Tracy home in RSM built in 1996.

I believe he window manufacture is out of business. I am trying to find these clips that hold the window in place

The size is wrong because the latch will not line up with the screw to tighten to the frame,the old latch from the spring is 3/4-1" long a the one you sent is a little over an inch a that's why it will not line up to secure screw to window frame

Can you identify and locate part number for this item in the picture? Thank you so much.

Looking for replacement latches as the sun has really taken its toll on these.

Hello, I wanted to buy a couple more of your 26-055 item, but it's no longer on your website. I have attached images of original latch. Can you recommend something that I can order instead? Here is what I ordered before from you: Top Tilt Latch, Neutral 26-055 Thanks.

We live in a park model and have sliding windows with latches/locks. I think from extreme heat the latch has become brittle and broke. Is there replacement parts for latches/locks

please see attached photos of slide release latches i need to replace on aluminum replacement windows. from the top it is 2-3/8" long and 3/4" wide. thank you for your time.

We just bought a house built in 1984. Windows say NOR-GUARD on them. Several of these are broken, so I have screw drivers propped in there to keep them from tilting open. Fortunately, we have a few of them that aren't broken so we can send you a good photo.

I've been looking for this one for a while. Holes are 2-7/16" apart. Width is 7/8" and depth is 5/16".