Viewing all customer Discussions for:

26-226 Pivot Bar, 3-1/16"

Hello No brand name on my windows :0( These cast parts keep breaking. They hold the window spring up. Can you help? (2) per window Thanks John

Parts I believe are correct: 26-226 Pivot Bar 15-178 Pivot Lock Shoe S600-17 17" spiral balance Does this look right to you. Thank you!

Please contact me if you have this part. I will buy 2. The pin has the number "8" stamped on it. Bob

I'm fixing up some windows in a new home, several of the pivot mechanisms are old/broken so i am trying my best to troubleshoot and replace. I recently bought a set of the S140-9 (L and R) as replacements for an Alside window (I believe the now discontinued excalibur version 0201). I was able to re ... (cont.)

For an Alside 2000 Vinyl replacement window This pivot bar may be stamped with the number: 12310 Any other numbers stamped on the part are unimportant - they are for the factory only.

Trying to find a match for these pivot bars. Can't find any window maker info anywhere. There is a #1 on the old pivot bars. The shoes have a cast cam and a couple are broke. Any info you could provide would be much appreciated. Thanks

Hello, I am wondering if I could get some help matching these pivot bars and shoes? Thanks so much for your help, Joseph

Window is 37" high x 32" wide. Lower window has broken pivots and broken pivot bars. No markings on parts.

Need replacement balances and bottom pins

Looking for these replacement parts on a Wenco window, MFG Code JW-12 Pivot Bar/Pivot Shoe Any help is greatly appreciated, Don

This window is removable (top and bottom go up and down). This piece was in the bottom of the removable window (one on each side).It is held in with a phillips screw.The window was not shutting and this piece was bent and broke. Thank you for your assistance.Mark

The other assembly in a window is broken. Our window will not stay up as a result. I think the window is Milgard but I am not sure. I can't find any branding or part numbers on the window anywhere. I am also missing one of these white plastic window pieces. Could you help identify them? Thanks. ... (cont.)

I m looking for a replacement for this tilt latch and these pivot bars, I think they're called for my double hung window. I dnt see a manufacturer name o jn the window anywhere. Please help. Thank u for ur time

Can you help with this part. It's the part that goes into the coil balance shoe Thanks

Good Morning Everyone I am in need of a pivot shoe that is almost the same part(15-188)except that the width is 1" not 1 1/4. The parts are the same except for that dimension. Can you supply that part number. The pivot that is used is 22-226 and this is for the 900 series spiral balance.Good morni ... (cont.)

Looking for the part number to what I believe is from an Andersen double hung window. 1" between 2 screw holes, slightly under 3 inch length.

For a window

I think the pivot bar might be Ashland? But the pivot shoe is broken on the sash and I need to replace it. Thanks

Part on window

Looking for vinyl bushings to fit over existing coils versus just the screws. Also, I am wondering if my existing coil spring stamped with the number 8 and 9...are equivalent of our replacement springs they are stamped as 8K and 9K. Wondering if 1970 vinyl windows are metric or not? A 2.2 conversi ... (cont.)