Viewing all customer Discussions for:

26-226 Pivot Bar, 3-1/16"

This shash bar fits into lower sash window frame... it is square, metal 13/16 long, square barrel 6/16, head diameter 6/16

Went to clean screen - should have just let the cobwebs alone!!! Pivot Shoe broke - probably both. Pivot Bar missing - then broke the other side taking it apart. Can you tell me what I need to fix? Have the same windows in other parts of the house, does it matter the window size for replacements ... (cont.)

I have two bathroom windows that will no longer slide, so I guess I need both the parts that go in the frame (x8) and the replacement metal posts that go in the window glass frames that slide as well. I think your service for me to be able to email photos is terrific. I hope you can help me find rep ... (cont.)

The picture you see shows a broken bolt from replacement storm windows (probably about 20 to 30 years old) in our 1879 home. Is this a sash bolt? We' need to replace quite few of these. What do you think? The numbers on the ones that broke off are 2,5, and 6.

this pin is part of the window that allows it to go up and down

Hi, I used your site to get some replacement pivot bars (26-226) and they are perfect. However, I realized that those were only useful for the inner (lower) window. The outer (upper) window needs a bar that sticks out a bit longer. I'm unable to find the equivalent pivot bar. Could you please assist ... (cont.)

I need about 20 of these 2 13/16 pivot bar with round head on one end and a hole 1 3/8" from the round end and a 5 in a circle om the shaft

Can you help me determine what type of pivot bars I need to fix my windows? I hope the attached pictures will help. There are two different pivot bars. One has the number 5 printed on it and is missing an end and one has the number 7. Thank you for any help you can offer!

Could you identify?

the part that the pbs goes into does not go up and down, Is there a spring for this, the pbs # is 26-226

Hi , I 'm need this part ; 2 ,3/4long , and 1,7/16 from the head to the hole , I'm needing 6 .

Hi there I'm trying to get replacement part for my double hung tilt out windows. The windows came with the house so I have idea what brand they are. I need the bottom window pivot bars. The broken one that I have in the picture says 9862. The attached photos show the measurements. It was the best I ... (cont.)

I am having difficulty finding an exact match. Would you be able to recommend a replacement?

Hello, I am looking to replace some Metal Cams and some window pivot bars.I have attached 2 pictures of my shoe assembly.Any help would be greatly appreciated. Regards,Joe

Hi, I`ve received coil balances and they worked well. Thank you for that very much. While replacing coil balances I found out that I`m missing one of the pivot bar. Could you please help me to identify what type of pivot bar I need?

These are on the bottom of my tilt in vinyl window

Can you let me know if your Product Code: 26-226 is the same as the pic I have attached.

Please help identify this coil spring, pivot bar and shoe. The coil is 1/2" wide. The pivot bar is 3" long. The sash weighs 14lbs.

Hi attached are a couple of pics of my window hardware, the pivot bar on the opposite side has broken but I was able to match it to your 22-226 bar but I am having trouble locating a coil balance shoe to match the pic, I am not even sure if I need one or just a new coli? coil has come off the base, ... (cont.)

Looking for 10 replacement parts