Viewing all customer Discussions for:

26-226 Pivot Bar, 3-1/16"

When I open my window(lift it up) I can see two of this parts at the bottom of the window frame in both sides. It looks like these parts hold the window open since they are broken and my window will not hold open position any more. I showed these pics to the window/door guy in Homedepot but he said ... (cont.)

Need Pivot Shoe, 1/2" thickness as shown in the picture Need Pivot Bar, 1.5" (9864 part#) Need crank Spiral balance diameter 5/8" Tube balance lenght 25" Red tip Window size top 29.5wx29h, bottom 30.5w x29h

Hi, I did see either a number 9 or 6 on the piece itself

A pivot bar similar to the 26-226 : Pivot Bar, 3-1/16" But with the first screw hole being where the first imprint hole is on the bar. There is a number 6 or 9 imprinted on my bar

Trying too figure out what kind of pivot bar this is.

My lower sash pivot bars are both broken, i am attaching the pic of one. How do i identify the replacement?

I'm looking to replace the entire balance, pivot bars and pivot shoes on two windows in my home. The window jamb does not have cut outs to easily remove the pivot shoes but I'm concerned the vinyl/plastic components to the jamb will snap if I attempt to use the jamb spreaders. Do you have any sugges ... (cont.)

I was able to take the shoe (with the coil) out of a working window.

Found this item in the picture that appears to be a broken pivot bar. Window obviously does not slide up and down and remain intact. I do not know the window manufacturer of this vinyl double hung window. It looks a lot like a 26-030, but the part in the frame

It looks like either 26-030 or 26-352 but it's not exactly either one. Can you tell me which one I should order. Thanks Bruce

This is the part that is found at the underside of the sash which locks into the shoe mechanism.

Window issues

I have Paradigm double hung windows. Would the 26-226 work? it is a little longer than mine but other measurements look the same. Thank you for your help!

I could not locate the attached pivot bar on your site. Thanks.

this is a picture of a pivot bar that i need. if you have this part, what is the part number and the price?

I ordered 3 1/16" pivot bars (26-226) for a vinyl window double coil balance, and they worked like a charm. I have a window where one double coil balance is missing and the other damaged. The damaged one has 540 stamped on the coil, and the plastic housing has a capital A stamped on it. There are no ... (cont.)

They are 1/2 inch thick Window is about 16 pounds One part is stationary while the other part with the pivot bar moves with the window Please send part numbers for the coil assembly and pivot bars.

I need 2 of these to hold the window into the side springs at the bottom of the window.

I need assistance identifying the type of replacement parts I need to fix my window. The window model number is H-R40-44x60, the series is DH11. The window peg broke, probably due to the track part getting stuck. If I could get help identifying the parts and getting a how to on how to fix the window ... (cont.)

no markings on window. It looks like there are separate pins for upper and lower sash. Both are single hole. One centers at 1" 3/8 and the other at 1" 5/8.