Viewing all customer Discussions for:

26-234 Tilt Latch Actuator

Would you have a replacement part for this slide? MEASUREMENTSt: 1 7/8

I ordered 30 of these that did not fit. The prongs were too wide and too long. I am returning them today and have included an old one to help identify. The return policy said I must reorder them. I'll be glad to do so if I can know what to order. Thank you!

I am sending this email with attached pictures of two windows that are missing vent locks. Window is stamped with Repco IGCC CBA 1994. I am looking to replace four broken vent locks on home windows, please see attached. Your time to this matter is very appreciated. Thank you in advance. ... (cont.)

i got your 26-234 s and the clips are to short they need to be 3/8" rather then the 1/4 that the 26-2345 measure "deep" all the other sizes are fine the with of the pins is 3/16" with of clips at base is 1/4" over all size is 7/8" x 2 "

Hello and thanks in advance for your help. I believe the lever is a 26-234. The latch portion I can not identify. Hopefully you have seen them before. Geary

Earthwise 7000 series installed in 1998 Model 740 34.124 x 70.25 white The right window tilt latch has broken there are no stamps or markings on the part that came off.

These are vinyl, single hung windows. I need the mechanisms that are slide in. there are 2 on each window to release each side. Thst allow the window to tilt

I believe it is part number 26-234. It could be 26-119

Attached are pictures of window parts I am trying to identify. I purchased item 26-119 (sash release lever), but it is not the correct size. I need to replace all 3 parts in the pictures. Please let me know if you need any other pictures or measurements. Thank you for your assistance! ... (cont.)

It looks like part # 26-119 and 26-234 Although you don't provide the measurements for #26-234 between the prongs. All the measurements match mine except the distance between the prongs on my part is 3/8" and your part measures 1/2" between prongs. It may not make a difference. I am repairing Emp ... (cont.)

I need to buy sash release levers like the one in the attached images, except that the one in the images is broken. That's the problem; they break easily so I need several new ones. They measure 2 inches long by 7/8 inches wide and the protrusion below seems to be 9/32 of an inch. They're ap ... (cont.)

I have several windows which need this part replaced 26-234 but have one or two windows that also need the internal latch that coordinates with this actuator but i can not identify it anywhere