Viewing all customer Discussions for:

26-234 Tilt Latch Actuator

I need to replace several of these tilt in latches on my windows, The latch measures 2" long by 1/2 inch wide. The 2 pieces that break off on the underside are about 1/4 inch between the 2 plastic pieces that fit into the window sill.I believe these windows are Certainteed windows from the late 80 ... (cont.)

Part is 2" long and has grooves to slide to the left to tile window. Mfg by Barrier Ent . Thank you for your assistance

Hey gang, Looking for this tilt latch button. Thanks, Erik

Approx 2" length, 7/8" wideI need at least 6 pieces ASAP!

I SENT BACK SASH RELEASE LEVER 26-119. THE PRONGS ON THOSE WERE 8/16 FROM LEFT SIDE EDGE TO OUTSIDE EDGE OF SECOND ONE. MY OLD ONES WERE 5/16 FROM THE SAME. DO YOU HAVE THESE

2" x 7/8" Alumax was bought out by another window manufacturer, but I don't know who.

My windows were installed in 1997. I just moved into the house. The manufacturer appears to have been Outlook Window Partnership in Lincoln, NE. They are no longer in business. The etching says, "Outlook 4-69." I believe the part number is 503070, which apparently has been discontinued. The fi ... (cont.)

Do you carry the items shown there is a number 3 on the metal piece also the price. Thank You Richard

I need alumax windows lach, 25

Attached is what is probably a warranty sticker for the windows for which we need parts, as well as pics of the three parts we need. I have named the parts according to function. The windows are vinyl double-hung windows. 1) The window actuator (round steel part with square hole into which the wi ... (cont.)

Purchased your tilt latch 26-393 found that latch does not fit my vinyl windows. Attached two photos of your latch on left my latch on right. Can you please recommend replacement .

Hello, can you confirm my part to be product code: 26-234? These parts would be for my mother's windows. The measurements I've come up with are 2" long, 7/8" wide, 1/8" thick at the ends, and 5/16" thick at the center where the notch / ridge is. Unfortunately, I can't measure the section wher ... (cont.)

Back in July I purchased part #26-234 from you. Now I need to order the part pictured that 26-234 goes in to. I didn't see it on your website. Can you help? Looking for 20 pcs.

looking for the part that releases the window so it can be dropped in to clean. They are on the top of the window and have prongs that go into the window casing, but the prongs are broken off. The number on the window is 12 10 92 88 I am told they are Vetter windows.

Need to replace left and right

Just like 26-234 but tangs aren't 7/16 but close to 3/8 and under 1/4 wide But wider than 1/8 white in color

Window release tab to let window tilt inside

I am requesting replacement slide buttons due to the one or both prongs snapping off. The bottom view picture should provide the spacing between the 2 prongs even though 1 prong has snapped off. Please let me know if you required additional information or pictures.

Where to find these parts.

Vinyl windows, 18 years old, single slide. the spiral balancer "top" end is malfunctioning on many windows. I do not know the brand of the window. balancers are 28 7/8 inches long, 3/8 in diameter and have a yellow plastic fitting at bottom. I have 16 windows with same spiral balancer-- ... (cont.)