Viewing all customer Discussions for:

26-244 Tilt Window Latch, Right Hand

Looking to replace some window tilt latches

I am having a terrible time finding an exact match for this specific tilt latch. The unit has the following dimensions: Width - 2 5/8"; Height - 11/16; Depth - 7/16. It was located in a vinyl sash and clicks into the top of the sash. Thanks in advance for your help!

I am in need of these tilt lock parts. I have Simonton windows in my home that were installed in late 2000. Can you recommend the correct part? Markings on the part include "Pat # 5.139.291" and a "08" on the snap which I believe is a cavity ID.

Hello! My name is Thuyvan Le. I'm looking for the replacement part for my broken window. Here's what I need: 1/ Tilt latch 2/ Pivot lock shoe I couldn't find the brand or model of my window anywhere, so I measured my broken parts and giving as much information as I can in the above picture, hopeful ... (cont.)

You use to carry part 26-264 - top tilt latch, right hand. I am looking for that part along with the corresponding left hand sash.

I am looking to replace the attached parts for 3 windows in my home.

I think 26-419 and 26-420 may be a good match, but I want to be sure. Please advise as I am trying to order in bulk and do not want to mess this up. Thank you in advance.

Facing the window from the inside I need : Qty 2 left side replacements Qty 1 right side replacement Thanks, Al

Hello, Trouble finding an exact match for this latch. Please let me know if you have something that will work. Thanks, Gary

The latch for tilt window is broken. Three latches on the left of the windows. The house was built in 1998. If you have the parts I need to order some. I bought some at Lowes but they didn't work because the sides of the ones they have do not have a smooth side like the ones in my house. See attac ... (cont.)

Numbers on the back. Pat# 5,139,291 8A Also the # 75 appears on a tab.

Last year a handyman told me to order these WHITE latches from you. I ordered 4 sets. I went to replace them today and they are wrong. AS you see the old one I removed is beige and smaller than the white ones I got from you. There is a number on the back of the beige one that I need. It says 092. In ... (cont.)

Hello, I need to replace tilt latches for my window, but I can't seem to find a match. Can you tell me what these are? They're about 2 5/8" by 11/16" and have the end broken off.

I knocked out broken latch and measured , seem to be a 26-420 & 26-419 size. And a vent latch 26-122. Please advise as to correctness of my choices.

Need ASAP

In need of replacement tilt latches, left & right, for Milgard Double Hung Vinyl windows.

these are old worn out can you match these i need a set of 2

My step father asked me to look if this part that broke on one of his windows. The window had a sticker on it that aaid NAMI windows aama/nwwda 101/i.s.2-97 astm F 588 The part shows on the underside says the number 8590. I found your website and wanted to see if this part is something can be r ... (cont.)

Need window tilt latches for MW single hung vinyl windows new in 2001

2 11/16ths long 11/16ths wide 7/17ths deep white or ivory if possible I need 20