Viewing all customer Discussions for:

15-002 Channel Balance Shoe, 1" Depth

the bottom seems to be 15-002 but I cannot id the top, these windows are aprox. 18 years and are PGT single glase , single hung , channel is 30" long x 1/2". hope you can help. thank you james

I want to make sure I purachase the correct balance - I don't know the weight: Window Manufacturer is Atrium - The part number on the balance is: 28-3-AX CMC 11 Can you suggest the correct replacement balance? Thanks for your help Joe

Hello, I need help identifying these Channel Balances. Photos attached. they are 1/2 inch width 33 inches long. thanks Martin

The existing broken channel balance for a BFS single hung window looks like your series 380 channel balance except for the shoe which has a part that looks like the 15-001 or 15-002. The existing shoe measures slightly over 1 1/16. It is not 1 1/8. The metal part measures 28 inches. Is this a ... (cont.)

28" Window balance is for an Alenco double hung window that's about 13 years old. Metal part of the balance is 28". Balance + guides is 29". Balance has hemmed edges, measures 9/16 across the bottom of the channel and 5/8 on the side of the channel. Markings are 2730, also has a BSI and DL stamp. To ... (cont.)

Hi, I have two sets of window channel balances to fix. I would like your help verifying that I'm buying the correct replacements. One set has the indication "25C" on the side, and the other has "16A". Both are non-tilting and have 1/2" channel width. The actual channel length appears to be 26" an ... (cont.)

I think I need Series 390 28 inch channel balances. The stamp on it is 2740. Can you confirm?

I don't have a camera to send pictures, but I've measured and re-measured balances, attachments, and windows. I'm fairly confident that I can go with the Non-Tilt Series 351 (1/2 wide) as the top attachment 19-002, and the shoe attachment 15-002 (1x1) match exactly with the measurements on your sit ... (cont.)

Does the Channel balance top and channel balance shoe come as one piece when both are ordered with the channel balance? I have the correct ones figured out from the pictures. Thanks for the great video! Kim And just to double check... it looks like the only difference between 351 and 390 series ... (cont.)

Hello, I am needing some help in identifying the type of series I need to purchase. The problem is that I do not have a channel balance that is not damaged. I included some pictures of one that has the least damage. The sash is 1/2" x 29" and has 2820 written on it. Thanks, Miguel ... (cont.)

Looking to identify and then purchase new channel balances for windows in my home. I only found one marking on one of the broken ones: 223OZ. These are kind of old, probably 20+ years. Attached are some photos to help. It is 23 inches long (1 ft, 11'')

Hello, All the pulleys in my balances have bascially disintegrated and all my windows will not stay up. House was built in 2003. My balance is 28" long and has the following numbers stamped on it: DB L02 2730. Measured with is 9/16". My windows are Non Tilt. It has the winged top which ... (cont.)

I have a 30 inch channel balance that needs replacing. I have identified the top as a 19-005 and the bottom as a 15-002. I do not have any identifying marks on the balance itself. do you have a product that will fit my needs? Thanks in advance

I need to replace an 18" long 1/2" channel balance. Your series 390 is the closest match but the balance I have has a 19-005 type top instead of the 19-002. What do you recommend?

I am seeking replacement balancers and accessories to replace balancers with the following code printed on the existing balancer: 28 4 AX CMC 7 The above balancer is 1/2 wide and the metal portion is 29" long. Please give me the correct part number for the balancer and the replacement plasti ... (cont.)

Here are some pictures the size is 1/2 inch by 22 any help would be greatful

I have a number of 1/2-inch channel balances that need to be replaced. The markings are "32 3 FT CMC 2". What do I need to order to replace it? I included photos of the OEM channel balance, although I have used a 3130 in the past that I was able to locate locally. Thank you, Mike ... (cont.)

Hello Paul, The windows in my home were manufactured by Superior Windows in Ontario, California. I have several single hung, dual glazed aluminum windows with the following numbers stamped on the balance: 23 4 JT CMC 2 . The sash is 32 X 36 dual glazed (heavy). Can you help identify the top and ... (cont.)

the stamped number on one balance is 26 D and the other is a 20 C. Are the balance's available for these windows and what is the cost the metal clips that attach to the window to load the balance has broken on both models Thanks for any help Wes

I need a replacement channel balance for a part marked 2530 BSI that is 26" long and 1/2" wide. what do you recommend?