Viewing all customer Discussions for:

26-150 Cam Pivot Pair

Hello, Im looking for weathershied sash pivot parts for my 2005 double hung windows.

The window mfg was/is WeatherShield double hung windows the length of the insert is 34" x 5/8" channel width is 11/16". I also attached the stamped "code" that was on the part. The part failed with the breakage (3 pcs) of the spring support part (pic attached as well).

looking for these pivot pins(left and right)

Im trying to find a set of window sash pivots that match this one. There is a left and right side, they are just mirrored. I couldn't find any numbers or names on the parts. Hopefully someone recognizes this one. Thank you for the help.

I have Peachtree double hung windows from around 2005 that will not stay open. I think the problem is the cam piece on the side of the window. They are made from pot metal which I suspect has weakened over the years. If I remove them and straighten them it solves the problem for a few days but th ... (cont.)

I am looking for a replacement for this style of window pin that keeps the window in its track. It's 1/2" wide. I contacted the company that made the windows, but they no longer stock that piece. thanks!

I have three broken carrier hinge pins on double hung windows. Here's a picture of the label off the windows and the pins.

Full measurements are:- height 1 1/4"- length 1 1/8"- width 5/16"

Ever see pivot bars like this? I need a pair. Thanks

These 2 pictures of the broken pivot pin in my old (1998) Louisiana Pacific double hung windows, I am going to repair the small amount of rotted wood with a Minwax wood filler. I have about 5 windows to repair.

Hello, i need a replcement pivot for a double hung window. Is that something that you have in stock?

Can you identify these parts? I replaced the channel balances in five windows and also found these broken parts.Thanks, Dennis

I need pivot bars for a replacement window. I can not find my paper work but the windows were purchased in 2005. I am adding photos of the part and the window label. Thomas

Hi there, this part at the buttom of the window and when you push window down, it pulls the balance down.

Hiya - got a window pivot bar that works with your 751 knife block balance, but we didn't notice that a few were broken/corroded. Thanks.

I need to replace broken window pivots. Left and right. I do not know the window brand.

DB K03 33 reg stamped on Chanel, window is removable Chanel is 34"

Hope you are well. I have a double hung vinyl window in need of upkeep. I removed the sashes and they each weigh 12.6lbs. I removed the balance and it is one piece of vinyl with an aluminum balance inside. The balance channel measures 33" (h) and 1" (w). This is after I removed the vinyl insert that ... (cont.)

34 HD Balance

I would like to buy balances for my Loewen single-hung tilt windows.I think I need to special order because they are nearly thesame as the S751-37 (36TG), but mine have smooth (non-ribbed) channels.Here are the details:Type: Loewen single-hung tilt windowOverall window: 39"w x 67"hSash: 39"w x 40"hS ... (cont.)