Viewing all customer Discussions for:

15-005 Winged Channel Balance Shoe, 1" Depth

Picture 1 shows the stamp on the slide 28D Picture 2 shows the length of the METAL rod = 29" Picture 3 shows the width 9/16 Picture 4 shows the depth 1/2 Picture 5 shows the clip

Hello, I have windows that are approx. 9 years old bearing the labels: Series:Mark 40/50 Premium STD - AAMA/NWWDA 101/ I.S. 2-97 - H-LC25/35-52X96. The retainers that keep the spring loaded balance are breaking at the top and allowing the balance to move out of the window. Need replacement caps ( ... (cont.)

Help! I've become one of those people with a piece of wood holding my window open. The length of my existing balance (just the metal) is 27" and the width is

Please advise for replace center balance, marked "25 3 JU 7"

I have two sets of window channel sets I need. The first channel is a 2720 bsi. It measures metal to metal 28" long. THe second channel is stamped 2130 bsi. It measures 22" long metal to metal tip to tip. I am also in need of the plastic stops that go at the top of the window. They are black plasti ... (cont.)

15in x 0.5 in. 1402 weight. Need a match.

We are looking for parts for three Kenco windows. We have a 29" balance and are looking for - 2 springs and 6 retainers that screw onto the top of the window. I have a few more photos than what is attached and can send them if needed. Series Mark 40/50.

My customer is looking to get some of these. Customer states the following number is on the shank. 26-4 AA CMC 11 Please advise Wayne

For Milgard 60" H X 36" W aluminum windows, I need 6 replacement Balancers. The stamp info says 25 3 B.S.I. PK. The window weighs 14 pounds. The shoe and top attached are winged and the shoe is 1" and looks likes 15-005 and the top looks like the 19-005 The confusing part for me is that the ... (cont.)

I need assistance selecting the correct replacement sash spring. The existing metal channel is 33" long. Sash weight is 23#. See attached photos Thanks Eric

I'm trying to find the correct window balancer to replace one that broke. It is 14" and the only stamp on the side says "13 2 CO CALDWELL" (could possibly be CD). Pictures of both ends are also attached. I tried to select the correct part myself but I could not identify the subtle differences in s ... (cont.)

I need to replace my Channel balance and need to make sure I get the one with the correct ends. I have attached pictures of each end. On the channel itself, it has the number 2840 DL listed. Can you please help me get the right channel balance? Thanks Dan

I have 2 channel balances in need of replacement. The channel alone is 27" on one and the other is 9" and the channels are hemmed. I can't figure out the sash weight or what to order for the top and bottom. I see similar, but can't find that same top. Thank you in advance!

I need to order (2) new channel balances for my non-tilt vinyl window. The code on the original balances is BSI 24 DS 35 The brand of my window is Windowmaster. I have attached several photos of the end clips, which I cannot seem to match up the clip types shown on your website. Please advise ... (cont.)

1/2" wide and 30' long. on the unit it has 2910 and the other has 2900 i need 4 of each alcan windows 36x64 is one they are 25 years old alcan windows 18x64 thank you mike

I have a 1/2" block and tackle balance stamped 273000H does this mean anything to you? Is it simply for 2720 window. The top looks similar to 19-005 and the 15-004 or -005. What series do you recommend? Thanks, Mario

Metal is 27"

This one is 26" in length metal end to metal end. We are at a camp and need to go through 10 buildings and take a count. This is a inquiry to find cost an availability. Thank you, Doug.

Please help me select the proper balance for my window. I will need 6 of these. They are Harcar aluminum windows. the windows are double pane. The number I think stamped on them is 2990. It is a trade size 1/2 (it does measure .562) it is stamped 30 and the u channel is 30 inches long. ... (cont.)

I need two 28" assembled window balances. There is a stamped marking 2740 H.F on it . Looking at your website it looks like your 28" Series 385 Channel Balance option 2740 will fit . But I think the shoe is 15-005. The shoe is 1 " like that in your catalog page 'Channel-Balance-Shoe/pd/Replaceme ... (cont.)