Viewing all customer Discussions for:

15-005 Winged Channel Balance Shoe, 1" Depth

Need these parts to repair a single hung window in Florida residence. Manufacturer appears to be Simonton Windows: Simonton H LC45 - 53x77 single hung window series 435.

I have the window balance, B04 - 2950. Do you have the Nuair balance that corresponds? If you do, what is the cost and how might I order it. Thanks

Howdy I need 2 of these , not 100% what series it is , thanks. Stamp on side - 38 4 IO Caldwell

I need to replace entire balance as a unit. Please advise what your part # 's are. The channel is 27" long

Hello, I am ordering four 2730 complete window balances. I have included the photos of the top and bottom shoes. If there are any questions I can be contacted via email at the adders as sent. Thanks

I need left and right channel balancers for window that installed in a new house in 1996 or 1997. The photo with the "unique" label is for a similar balancer that was installed some years ago in a similar window. The other 4 photos are of the broken balancer (you will notice the spring is missing) ... (cont.)

Can you help me to identify the bottom Channel guide/end? I think that it is a 60-904, based on on-line catalogs that I have seen, but I'm not sure. Thanks!

I have three windows too replace the channel balances to replace. want to try the first one and the ends don't look the exact same as pictured. there is a stamp on it ( 23 46 gw cmc the best I can tell, The window is 50 1/2" wide 48" tall, whole thing, it is a non-tilt and plastic for the glass area ... (cont.)

I need to replace a number of balances, the numbers stamped on the channels are: 2810 BSI, 2830 BSI, and 2440 BSI with a backward C. Having trouble identifying the balance shoes. The top shoe I am confident is a 19-002, however, the bottom shoe could be either a 15-001 (series 390) or 15-005 (ser ... (cont.)

Hello, I was looking at your 1/2" Wide Channel Balances cl/1_2-inch-Wide-Channel-Balances to replace a broken one in my son's room. The length of the original is 26.5" (please see photo 3 for stamp) I see that you don't offer half sizes? So I was wondering if I could just get away with a 26". I ... (cont.)

Please see attached photos and let me know which replacement balance I need to order. Depth is 9/16" and width is 1/2", length is 33" (without fittings).

The existing channel is 29" long. The window weights 29 lbs. the closes I believe is the series 380 with the added weight.

The balancers I need to replace are stamped Caldwell 20 3 KK. I looked through your pages and it looks like it would be a S380-20. The window weighs 19.6 lbs, so I figure that means the 1950 option also. Could you please confirm this before I order. Also, it looks like the shoe and top a ... (cont.)

Could you please recommend the correct channel balance. I have not been able to find a top guide that matches mine. I will also need replacement take out clips as my windows do not have any. Thanks a lot! channel length 25" channel width 1/2 stamped 2490 BSI LA 30

Spring is 12 inches end to end Metal channel is 23 inches long and 1/2 inch Channel is stamped "22E" Need 4 Windows are heavy impact glass Can you help? Needs to be replaced to complete a sale of a condo Jay

Markings are 29 9 kW cmc 7. Glide is 30" window is 28.4 lbs can you help identifie and would you have in stock?

I would like to replace 8 of these (4 windows total) plus all the top sash guides for my Kinco windows. I measured the channel balance and it measured 30" (metal end to metal end). I have attached 4 pictures, one of each end, the only stamped markings and the entire balance. Could you please identif ... (cont.)

In the pictures I posted one has a picture of the model no. I need qty of 2, 1/2" wide, 16" long balances. 15 4 DR Caldwell

Matches your 27" channel balance but I'm unsure which weight to buy.

Hello, I've done some digging and am not yet sure I've found the correct channel balance and top/bottom guides. I've uploaded a few images here. The markings on the balance say 29 3 DO CALDWELL. The length is 30". Please let me know which replacement parts you think are the correct match. ... (cont.)