Viewing all customer Discussions for:

16-031 Mounting Bracket

On the coil spring it shows 5EH. I could not get all the parts out of the window for measurements

Balance shoe and pivot bar ok ,coil snapped need 2 coils only double hung windiw 62" tall also need 2 clips that coil hole fits on to

CGI window bought 2016. ANSI Z97.1 2009 16 CFG 1207.CH SGCC 4362 (h) UA 3/8. Broken plastic part accompanying #10 tensioner.

Hello! The marking says "7GI". Is that 7 pounds on each side, total of 14 pound window? (I can weigh the window too.) The two coils came apart on both sides, so the window doesn't stay open.

Holds spring in place for tension

I have Wincore 8800 hurricane windows with 48 lb sashes and the plastic clips keep breaking after only about 10-15 cycles. I tried to get parts from Window World and have been working on it since March. The last springs were not assembled as the two tandem springs.Do you sell a tandem housing like ... (cont.)

For anchoring Series S210-16 type of constant force coil balances

My pivot bar broke. Want to replace both the bar and shoe. Bar has "A5" and "14" markings on it. Shoe has 9 LB writing on it.

Hi there, this window became very difficult to open. I believe the coil balance busted on both sides? I've included label pics and I saw a 6lb mark on the shoe thing. Can you tell exactly what parts I need? Thanks!

Hello, we are looking for a part for a replacement window. We have purchased this window a few years back from Home Depot. I want to say it is a Jen weld brand I think. We looked on the band and we did not find any identification numbers I can look again. When I have to take the window back out t ... (cont.)

Hi. I'm not sure what I need here. I know that it's a coil and show but I am not sure of the brand of the window. Thanks

These windows were purchased from Home Depot in about 2012. Window balancer is stacked (refer to picture) each stacked balancer has a 6 printed on it the bottom balancer is longer than the top balancer. Balancer seems to be 2 1/16 wide about 3 7/8 tall.

Part is springloaded and keeps window from slamming shut

I would like to order the shoe with spring please provide part number and cost came off an American craftsman double hung window from Home Depot T YMy shoe broken the spring broke need replacement see pics there is a number 7 on it

Hi, the coil springs broke, wondering if you can tell me what the replacement is. The sash is 15.2lbs. I did find a number once I got a flashlight. Looks like 8 B 7

Need to replace 4 coils for two windows.

I need to replace L and R window tilt balance what parts do I need? Do I also need a Jamb spreader?

Please advice me as of what model can I get to replace the pivot shoe and coil from the attach picture. This window is double hung from American craftsman or Argon. Thank you.

"6 LB" on one set, a 42" wide windowno marking on the other set, a 30" wide window

Hello, I think the coil balance has broken on one window. The picture is from the one out 3 that works still. The other info I found is as foloows: 8501 31 1/8x 64 3/4. Argon Half Sc..SillAngle Table2 HeadExponder LowE3 White 22686776.1.2. Silver Line. The coil holder has a blue part in white ... (cont.)