Viewing all customer Discussions for:

36-048 2-Bar Hinge Set, 10"

Hi, Thank you for looking at this. Can't find any markings or numbers. The part at the end of the gear levers will not stay attached to the window. Thank you

These windows were made by Slocomb industries, the hardware has truth on it . They are approximately 17 years old. I need 5 sets of hinges for them.

Can you help me from photos.

I need a crank handle only and the top and bottom arms for an encasement window

I am looking for the right and left opening version of this track. The part numbers are 30751 and 30752. These mount on the top and bottom of the frame / opening. Not the window itself Thank you!

The long arm is about 10" long. The short are is about 3 1/2" long. I need to replace it.

Need to identify the part numbers for the operators, hinge assemblies, and any associated components as shown in the photos.

This assembly came off an Anderson Perma Shield casement window, possibly model C14T. It looks like it's from 1986. The entire assembly is bent and needs to be replaced. Any help you can provide would be greatly appreciate. Thank you.

We need 2 operators, plus 1 hinge for Milgard windows, the operators are 5" in length

truth casement operator # on arm 31230A, and 31229. 10" x 7 3/4" x 5 1/4"

TRUST MECHANISM FOR CASEMENT WINDOWS

I want all the hardware parts from cranks to locking parts

The gears on the crank handle of my window are worn. I only need the handles. All other parts are in working order.

I am trying to identify the attached hinge for a window repair.

Need 2 different hinges for my kolbe casement windows. The plastic tabs that slides on the frame bracket broke. One is from a 33' and the other 21" windows.I have attached photos which show measurements and numbers. I have additional pictures if needed. Thank you. Gary

three pictures of the crank window the metal clip pictured with B isgood.What is missing on the A side of the window this clip. I need replacement part for this the US pat. number is pictured let me know if you need further information or can provide the replacement part. thank you ... (cont.)

I'm working on a Norco double casement window where the bottom of the window fell off. I have another window (luckily) but the lower window and hinge are gone. I'm hoping you might have one. Thanks Bruce

I have a crank window with a Truth hardware concealed hinge on it. The window hinges from the right outward and closes on the left, this is the bottom pivot arm that had a black slider that broke and the window doesn't close properly, the "t' shaped arm is stamped 6047G, but I find no searches. The ... (cont.)

I have a lower bracket that needs replaced. The operator is a truth entrygard dual arm operator. (I've already replaced that.) I just need a new bracket for the lower rail of the casement window in the sill. I have pictures attached below.

I'm pretty sure the picture has a left and right arm although I'm not sure which is which. They both have the name truth and a number of 33177A. On the other sides it has the #31133C and the other has a #31133 B. Can you help me out? Thank you!