Viewing all customer Discussions for:

36-049 2-Bar Hinge Set, 14"

One picture shows the word "TRUTH" on the arm of the mechanism that opens the window. There are no other identifying labels on the hardware or glass. The broken bracken appears to be about 2 1/2 inches long. Let me know if you need any other information

Hi we can not find this part, we need both sides left and right

Hello, this is a part from a casement window that slides into the track. Do you know if I can get this part, or something similar to it?

Looks came for the height of war of window

These are photos of the operating side of the window. I need parts for the opposite side. The parts are 14" long on the sill, 6 3/4" on the window frame and the arm between them is 8" long. There are no identifying numbers and I don't know the make of the windows. Any useful help will be apprecia ... (cont.)

Hi, this is the plastic slider that attaches to the end of the hinge. Any idea if this is a part I can purchase? It's the black piece

I need two shoes for an Amsco vinyl casement window. C-LC25-36x72. The top and bottom black plastic shoe broke, they do not stay in the groove of the ss operator track. When opening the window, it falls out of the frame and the hinges just bend. The photos attached are of the window adjacent to the ... (cont.)

Hellow swisco. I am looking for parts and have included a pic of parts and a list of parts from your site. If someone could look them over and give me some other parts that would go along with it and confirm the list I would appreciate it thanks.

Hello, I am trying to find the replacement part for the truth hardware awning hinge. The part numbers on the arm are 31705 and 31706 which I can't find online anywhere. Thank you. Patricia

I need the center opening mechanism for one window and when looking from the outside the bar assembly

Milgard window. Can you help us find the proper parts based upon these pictures and measurements? 7 1/4 top sash arm from frame to sash, 12 or 13" top track, 10 1/2 or so long arm on bottom, right hinged window, 4 1/2 or so curved arm

Hello, Looking for help identifying and ordering the part shown. Please pardon my poor description ... It's a casement that hinges in the upper right and left, and pushes out/cranks out at the bottom. The plastic that travels in the track cracked and isn't sliding properly. I'll order both side ... (cont.)

looking for left and right window awning hinges. Sash is connected at the top and window's bottom opens outward using Truth roto-gear awning operators 25-1/2"

No markings. Vinyl double glazed. No markings.Ordered crank actuators last month36-048 for awning windows?

I believe these are malta windows from 1979. I need the clip that screws on

Hello, I bought a home that was built in 1976. Every window is a casement window and the crank handles have R.O.W on them. The problem I'm having is the yellow plastic slide piece is deteriorating and causing closure issues. Thanks in advance.

Window arm/hinge for American craftsman casement window. Specifically the black piece.

I need some hinges and casement cranks, I thought I ordered the right ones (Swisco 36-024) but they don't fit. Can anyone tell me from the photos what I need to order? Thank you

I need to order the above parts for 3 awning windows.

Hi, I?m looking for replacement hardware for Roto casement windows. The number I found on the piece is HG04-2003. I didn?t see any of your replacement parts that match the dimensions in the drawings. Hope you can help. Thanks, Ken