Viewing all customer Discussions for:

90-077C Truth Window Lock, 2-1/16"

Can you help me to find a replacement. About 22 years old. Fastener spacing is different on current offerings at Home Depot.

This part is only about a 1/4 inch wide and 2 inches center to center on the screw holes and 2-9/16 overall length I bought item number 90-278 but it was to wide and would not close right Thanks Brian

I'm looking for 2 window sash locks. The windows were manufactured in 2003 by Cavco and sold through Matus in Glenside PA.

I would like to purchase # 90-077A , I need it to be 2 1/16 x 9/16, not 7/16 it's for a 20 year old Jeld-Wen window. Thanks

Truth Window Lock / Entry Gard is wrong size (too thick) need 90-161 with narrow keeper and 2 1/16 spacing. I already ordered and tried 90-077C and 90-279 and they were too thick so I think I need the 90-161

Hi,The Face mount keeper looks very similar to your 90-257. The photos of the latch/lock used are attached? Could you please let me know which one of yours can be used? Thanks.Fuyun

Window lock , need 6 sets

I'm looking for the Truth EntryGard 40381 with or without lugs in bronze. The screw hole centers are 1-7/8 inches. Thanks

I have an Entry Guard Truth latch and latch keeper. The latch keeper is what is broken. The numbers on the back of the latch are: 40381A, 268.643, Can you help me run this part down?

I would like to know what is the exact Truth part number for Swisco Product Code: 90-077C. I need 17.23.32. Also, I would like the Truth keeper 40367.32. Do you have it in stock?

Hello,I am looking to purchase some keepers for these Simonton windows. If you are unable to locate it maybe you could suggest a lock and keeper that would work on a sliding window. The screw spacing is 2 1/16" The distance from the lock screw to the face of the lock is 7/16" The house was built in ... (cont.)

can you match this hardware? THANKS

I need to find a replacement for this window lock in white.

I have a customer that needs this lock replaced. 2 and 1/16 inch from center to center

The locking mechanism looks like simonton based on part number 90-077C. I also need two pivot bars pictured. I've searched your catalog and couldn't match up perfectly. Any help is greatly appreciated

Do you have these 4 parts?

I need 2 different lengths and weight tolerances. The first ones are1/2 in wide and 34 inches long with wings and have 33 3 CO Caldwell printed on the side. The second ones are the same width with wings and are 28 inches by 1/2 inches and have 27 4 FP Caldwell printed on them. I tried but can't f ... (cont.)

Hello, I am trying to find replacements for the parts shown. They are from a Simmonton double hung window. The sash lock has a bore of 2 1/16". I need the spring mechanism, pivot bars, and balance shoes. Any help you could offer would be greatly appreciated

There are no numbers or markings that I can see. I think the windows are Acorn Vinyl. The holes are 2 1/16 center to center and the catch is riveted to the stationary top window

I need help in identifying these parts. I believe I have found some on your website but would like help before placing an order. Thank you