Viewing all customer Discussions for:

36-004-10 10" Stainless Steel 2 Bar Hinge Set

I'm looking for the bottom pivot for this casement window. Pivot and track. The picture of the operator is the only markings on the window.

I need the following for a casement window. (2) Hinge Arms Left Top (2) Hinge Arms Left Bottom (2) Hinge Arms Right Top (2) Hinge Arms Right Bottom Thank you,

I have a casement window that has the lower latch rusted out. Not sure what parts I should be ordering.

This is in addition to reference #D300555 EntryGard truth 40942-B, some parts need for bottom track glide arm, the pivot pin, bottom pin corroded .

Slides are broken right hand and left hand, also looking to replace seals.

I hope the pictures provide enough information on the parts I need. It's a bow window over 20 years old. The 2 pictures of the part needed is of the right window. The same part is needed for the left window

The crank and slides on several window hav totally rusted out. The enclosed are still in tack but are rusting. Cannot find manufacturer name. Can you tell what I need buy the pictures?

I need replacement parts for all of the hardware pieces shown in the pictures and I'm going to be sending more pictures as well. Some of the hardware is no longer working and needs to be replaced and then I want to have additional hardware in inventory for future replacement if you could help. Thank ... (cont.)

There is a upper window slider that keeps the top of the window from falling out of the frame. This slider clip that is screwed to the sash is bent and the window falls out from the top when the window is open. sash is 26" wide

I am looking to replace the existing broken casement window hinges. The bracket on the window frame is approximately 9 7/8". The bracket on the window itself is approximately 7 1/2" and the arm that connects to two is approximately 5 1/2". Would you have anything close that would work to make the ... (cont.)

We have a broken and wornout window open/close rail assembly. Is there a replacement part for this. Sticker shows series 9700/1470/1770/1870 P.L.#029-023

I have broken/chipped the Hinge shoes (at both the top and bottom of the sash) and need to replace the hinges on 1 casement window.The part number is 32010PS, on installation, I haven't been able to get both Hinge shoes into the glides at the same time. The sash is very heavy and prohibits much of ... (cont.)

Hello, we are in need of a crank out window crank, all we tell you about it is that the guide which is still attached to the window is 11 1/2 inches long, the opening in the window where the crank goes is 4 inched wide, the mounting holes that are visable on the window are two sets, the holes furthe ... (cont.)

For a Milgard window installed in 2000

Hi, I am trying to find a replacement part for my casement windows. I have attached some photos and also uploaded a video to my Google Drive:

Dear Sirs,I am trying to locate window hinges stamped interlock maxsash which are 300mm long x 30mm wide approx. the bottom and top hinges are handed top &bottom and not interchangeable, the window hinges are on approx. 40 year old wooden windows.Can you please assist in finding this item if pos ... (cont.)

This part is attached to the window sash, one on top, one on bottom. The black piece slides into a track which is attached to the window frame. The black part is laminated to a piece of metal (riveted) to the bracket. Do you have this part or one which will work on a Caradco casement window?? Th ... (cont.)

Greetings, we have several casement windows as shown. The hinges have failed on one and need to be replaced. We also need screws as the old ones are badly rusted. We prefer stainless steel parts if available.

I would like to replace the top and bottom hinges for a heavy wood casement window sash. I think the compatible part that you carry is 36-048. A couple of questions: Are these different for left and right handed openings? Is my window in the picture left-handed? What is the correct part number? Do ... (cont.)

Hello, I'm looking for a replacement top track/hinge combo for a casement window. I have added pictures, unfortunately the person taking measurements didn't do the best job. But two numbers are visible on the hardware I need next to the Truth logo on the arm I have 307448 and the other arm reads 3 ... (cont.)