Viewing all customer Discussions for:

32-056 11-3/4" Self-Closing Drawer Slide Pair

I'm looking for a replacement part for what I believe are Rutledge cabinets. This the rear mount for the back of the cabinet. The picture is of the left side railed mounted. The right side is what I'm looking for. The only identification I can find in on the drawer itself.

11 3/4" long

Having trouble finding replacement part for this late 90's builder grade kitchen drawer. Bent slightly from wear.

I am looking for plastic rear mounts for a sliding cabinet drawer. These have plastic knobs to fit into existing drilled holes. I attached photos of the broken mounts as well as the drawer slides that need to fit in them.

The mounting bracket that attaches to the rear of a cabinet for the left sliding drawer rail.

I don't seem to be able to find a similar slide at the box stores. 1995 hardward

Hi, So, I found the L-shaped bracket called V-Notch Bracket, but I need to know where to get the white L-shaped European-style drawer slider. One of the wheels is racked, and I must replace the slider. Thanks, Lex

I am in need of a back mounting bracket for a kitchen drawer slide. Mine has pegs on the back that go into the cabinet back wall. What other info do you need?

How to I remove these without breaking them? How are these installed? Are they glued on?

I was trying to move my cabinet drawer up and tried to remove the mounting brackets and ended up breaking one. Can't get them to budge at all. I can't find a replacement online.

I have this rear mounting bracket in my kitchen cabinets, and they appear to be missing all the screws to keep the sliding supports connected to the drawer. I'm not sure if the screws are actually needed. I am on a quest to find this plastic rear mounting bracket and read its installation instructi ... (cont.)

I would like to know if you can identify these. Also, If you carry them, Diamond Cabinets installed 2007

I just need to replace the left side

I am unable to find this black sliding drawer rear bracket anywhere. Please suggest thanks

I need to replace this to mount my drawer but cannot find the part

I am relocating my drawer to a different cabinet. How much for a pair of brackets?

Appears the cabinets are Mastercraft. Need the backplate support piece for the slide rail.

Hi! This bracket has wings on both sides, but one is broken in the photo. These sit horizontally. The brackets have no identifiable marks as to manufacturer. It is a single piece. It is about 1 5/8 long by 1 3/8 wide. I need at least 8 of them. Please help. Thank you!

This part hangs the back of a drawer rail ..... The cabinets are made by Merilat and the hardware associated are branded with a "grass" logo or a G* logo. The cabinets were made in the mid to late 1990s. Thanks in advance for your help finding this part

Need this rear slide bracket for pullout cabinet drawer.