Viewing all customer Discussions for:

32-061 21-5/8" Self-Closing Drawer Slide Pair

Our drawers are 22in and the cabinet is over 23in from the face to the back. Trying to find soft close replacements since these are over 15yrs old. Attached are photos with the measurements and of the current sliders. Thank you.

The sliding drawer back right bracket from one of our Mastercraft drawers broke. Do you recommend a replacement please?

Drawer roller

Corner mounted bracket for kitchen drawer, wheel has broken off, will need both corners. Top of bracket to center of wheel is about 2.5". Happy new year!

I have looked at your dimensions on 32-018 which handles a slide 7/8 inch tall and 32-089 handles 1 inch slide. I need 1 1/8 inch for my slide to clear. Is there a brace that will handle that?

Your 19-5/8" drawer slide appears to fit my kitchen drawers perfectly, but the cabinet box requires a 22-7/16 inch cabinet member slide for the drawer to go into. In other words, there is a several inch difference between the drawer size and the cabinet depth. The original slides are Grass 6600. ... (cont.)

I am looking for 1/2" wheel for my drawer. It's an old cabinet drawer. made by Brammer Living Kitchens Cabinets.

Good Afternoon, I'm looking for a replacement part for the right hand slider. Hoping to find the exact match with the wheels extended slightly past the drawer so it can fit in. Ed

Kent Moore Cabinets. The part does not use screws. It attaches to two holes at the back of the cabinet. One drawer fall. The others have not but most are damaged. I would like to get parts for 6 drawers.

How can I order all the drawer brackets and plastic back brackets? The stamp says UNIGRASS 6600

Will the 32-061 drawer glides work for pantry drawers that screw to the cabinet side walls?

The slides on the drawers are 19" and the only markings are G* and RD39-01 and LD39-01. The brackets that attach in the cabinet are 23" with no markings. They actually look to be 24" with the end bent so they fit into a plastic sleeve on back of cabinet.

The piece that is broken is a slide socket with an opening of 1 1/2 inches. I have found multiple slide sockets that have an opening of 7/8 inches.

Looking to replace several glides/hardware for Scheirich, circa. 1988. Drawer mounted hardware is 21 5/8". Back piece (ppw097) appears intact. Thanks.

Need to replace some draw rails see photos can you help?

I have an old Merrilat slide, and the socket broke. I don't know if I can just replace the socket, or the whole slide. The slide that attaches to the cabinet is 22-1/2" OAL, and the slide on the drawer is the same. The socket is a bit funky, and I believe it is no longer made. If I need to replace t ... (cont.)

my drawer slide just came out and it keeps coming out. I have fixed it as best as I could, but I need something done permanently .... On the bent slide that attaches to the cabinet, it says UNIGRASS 6600 L6) It seems like it is a little less than 21 3/4". Do you have a replacement part for this? ... (cont.)

This bracket is about 20 years old. It is 5.5" long, mounting side is 2" high and opening minus the grove is 1". The slide is 21-5/8" long and is a side mount.Moe

Bottom mount drawer hardware in kitchen 22" long. We need one pair

I ordered Home Depot Schrock cabinets 15 years ago or so and need to replace the glides on this lower unit. HD was not able to help. I can get you depth measurements if you have these available to you - starting with some pictures. Schrock has "proprietary" holes pre-drilled for their glides and I ... (cont.)