Viewing all customer Discussions for:

32-061 21-5/8" Self-Closing Drawer Slide Pair

I'm looking for a drawer socket to accommodate the narrow flange that reaches down from the bottom of our track. We have several drawers that are failing.

I'm looking for an under mount drawer guide that will replace a Mepla 2035/572. Do you have anything like that? The measurement from the back of the drawer front to the back of the drawer box is 20.75". The measurement from the front of the cabinet face to the back wall of the cabinet is 23.5". This ... (cont.)

Need this part

Bottom slide that is attached to the drawer

we ordered the part that was recommended to replace the mepla part that was installed on our cabintets Mepla543.000. roll/x 20357572 but seems that the lip of the rail of the new part is too wide to fit into the drawer. we are at our wits end. please help.

Need replacement sockets for 25+ yr old hardware that has 1 1/4" tall drawer tracks. Do you have sockets that accept these older (and larger) tracks? Seems that current standard is just 1" tall.

I just bought some unigrasso 6600 drawer slides. They worked . Now I need the same type of glide or slide for 3 other drawers. See the pictures. Please recommend the proper hardware needed.

The rear brackets for our pots and pans drawer are broken. See attached photos. Note that these brackets have a stub which fits inside the rail. The inside dimension that the stub will have to fit into is 13/16".If there is no replacement part available, can you recommend full rail and bracket syste ... (cont.)

Looking for unigrass draw slides. 21-5/8". Need drawer and wall attachment slides. Imprint on slide " Unigrass 6600".

Replacing a Unigrass 6600Hi Swisco,Spoke to Tim a few weeks back and he suggested that I send photos. Attached you will find photos of the railing on the inside of the top dresser drawer and then the photo of the railing on the drawer side. I took a shot of the far back of the drawer just in case yo ... (cont.)

KV 1284-3

Hi my name is Shannon. I purchased used kitchen cabinets with drawers for my craft room and was unaware that half of the drawer slide hardware was missing for 3 of the drawers. I have the tracks that mount to the bottom side of the drawer but I need the tracks and the other 2 pieces of hardware tha ... (cont.)

I have two different drawers. One is 22" and the other is 21 3/4" deep. The cabinet is 22 5/8" deep inside. I need replacement parts for two drawers of each depth.

The part that goes on the drawer is 22". The piece that connects to the cabinet is 24", but 1" is bent at a 90" angle so that it can attach at the back of the cabinet.

I don't see any parts numbers.

I am replacing a kitchen drawer and brackets; They are under mounts with the the slide connected to the drawer measuring 21/3/4" and the slide connected to the cabinet measuring 23", with this mounted in a hanging plastic bracket (pics attached) Looking for options or exact replacement with little r ... (cont.)

We need this kitchen drawer slide do you have this version The plastic rear socket is broke off, the one with plastic on is from another drawer for example

Hello, I can not find these anywhere, do you have these?

Hanging bracket is 4 7/8ths"L with about a 5/16ths hole. The rail is 21 1/2" long. I front know what the plastic off white piece is that connects the two. It is 2 3/4 total long. Can you help with finding replacements??? Please? Thank you!

To whom it may concern Attached please find photos of the product I need to replaceSize of tray is 10 3/4 wide by 21 1/4 longThe sides are 1/2 wide and 1 7/8 highThe metal sides are as seen in the picturePlease tell me if you have this stray available and the cost of itPlease e mail the informatio ... (cont.)