Viewing all customer Discussions for:

32-061 21-5/8" Self-Closing Drawer Slide Pair

I have a left side 21 5/8" X 1" under drawer mounted beige colored guide that has a bent rivet and wheel that I need to replace. Which set should I get? The 6600 model 32-061 is what looks to be the one. Is that correct? Please let me know. Campbell

Hope you can help, we need both lengths drawer glides 17-3/4 & 20-3/4. 4 sets of each. also need 8- 1" plastic spacers to hold glides at correct width

Unable to find plastic guides on cabinet where plastic drawer goes. Unfortunately I am unable to figure out how to attach the photos I took because I can't find this message when I return from photos

For kitchen cabinet drawer. Need the opposite side roller assembly. Right side when face drawer front.

currently have only the drawer insert in attached photo, want to add more using the 32-062 glide

Looking for the hardware that match these items. The slide on the drawer itself measures just over 22 3/8 inches. The slides that are attached to cabinets measure just under 23 inches. Also need the same hardware with measurements of 19 1/2 inches on the drawer and just over 20 inches on the cabine ... (cont.)

Drawer slide has an NL CO stamped on end.see photo.Slide is 21".From a Quakermaid cabinet. Probably 1968

My Unigrass 6600 right drawer roller/ wheel broke off so I was gonna repair it with a 32-039 but I'd rather just purchase a new right side slide. Are they discontinued by Grass?

Trying to find replacement hardware like this or similar. Must have a back bracket to attach to the back of the cabinet

I have an old metal cabinet with roller bearings in the drawer slides. The plastic or nylon wheel broke. It appears to be a rivet axle style so that it fits flush against the cabinet wall.Can you supply the proper bearing and rivet attachment?Thank you!Dan

Looking to replace a couple of bent drawer, glides on my kitchen cabinets.

I found your website! Now I know SWISCO IS AWESOME for replacement parts! Even our cabinet vendor said he has used your company hunting for parts for customers too. I AM WRITING BECAUSE: Pictured is the plastic back bracket that held up the drawer glide on a customers Merillate cabinet. The plastic ... (cont.)

My kitchen is almost new came on a David weekly home with little over three year of purchase. The wheel is a little loose. I wonder if you can help me buy this part or check any warranty? Appreciate your guidance. It is roughly a22' long drawer.

Tried numerous other ones and the bracket keeps the drawer from closing the whole way.

I need 4 back plates. Info on the piece Mepla 543.000.30.02

I have slide measures 1 1/8 inch wide has a lip goes to 3/4 width without lip need plastic rear mounts

My overall drawer length this 21 3/8 inches. Will this slide fit? The overall cabinet depth is 23 1/4

Bathroom vanity drawer broke. Looking to replace the plastic backplate. It is part #295.621-01.22 >pa66The length of the bottom rail as shown is 17 5/8 inches. The length of the top rail that slides over it is 18 1/2 inches.

this was put in in 1983-1986 on the drawers in a apartment kitchen,

Hi, can you help me find replacement parts for these damaged parts? Thank you, for all your help.