Viewing all customer Discussions for:

32-061 21-5/8" Self-Closing Drawer Slide Pair

Tried numerous other ones and the bracket keeps the drawer from closing the whole way.

I need 4 back plates. Info on the piece Mepla 543.000.30.02

I have slide measures 1 1/8 inch wide has a lip goes to 3/4 width without lip need plastic rear mounts

My overall drawer length this 21 3/8 inches. Will this slide fit? The overall cabinet depth is 23 1/4

Bathroom vanity drawer broke. Looking to replace the plastic backplate. It is part #295.621-01.22 >pa66The length of the bottom rail as shown is 17 5/8 inches. The length of the top rail that slides over it is 18 1/2 inches.

this was put in in 1983-1986 on the drawers in a apartment kitchen,

Hi, can you help me find replacement parts for these damaged parts? Thank you, for all your help.

Looking to replace this part in an old kitchen cabinet drawer.

I'm looking for the slides to that fit that drawer plate. The drawer broke had a new one made but don't have the side mounts. I'm not handy so don't want to replace the whole thing.

I have Late 1980's merrillate cabinets, slides marked unigrass 6600, inside base overall Dimension 23-1/2" drawer overall 21-3/4"My rails are 23" and 22-1/2" respectively I'd appreciate some assistance with part number and size and rear supports if needed .This forum seems extremely helpful.Thanks ... (cont.)

Looking for replacement with soft closing feature or just replacement ones for broken ones if others are not available or too expensive.

Good afternoon. I'm looking to purchase side rails and rear socket rails for a older set of Yorktown kitchen cabinets. Thanks Bob

I am trying to replace this set of drawer pulls. The top piece has unigrass 6600 on the top right along with LD. The only writing I can see on the bottom piece is RC on the right side. The top item measures 21-5/8" and the bottom piece measures 22-7/8". Please let me know what additional informa ... (cont.)

Good morning - I am trying to find a replacement piece for a broken Grass drawer slide. The words Unigrass 6600 is imprinted on the broken piece as well as "RD". This came off the right hand side of the drawer. The broken piece measures 21-5/8" long. I am attaching some pictures for reference. I am ... (cont.)

I have old shrock kitchen drawers and the plastic back plate cracked. The track has a width of 1 inch and the it seems that the plastic back plate is 1 1/16 inches wide.I called Shrock and they no longer have any parts.The glide is 21 1/2 inches long and the back plate is 3 3/4 inches and the tra ... (cont.)

Can you confirm that these are unigrass 6600? I need to order replacement slides

I have a drawer that measures 20" deep and it's 23-3/8" from the front of the cabinet to the inside back where 32-018 would be mounted. Which length slide do I need? 32-060 or 32-061? Thx!

Hi, I am looking for the other side to the roller shown. THat is I need a Drawer Left assembly (DL). The one shown is Drawer Right.

These were installed before I bought the property, and I don't know anything about them except that it was renovated in the 80s. Thanks!

This drawer slider mount in the back nothing on the sides approx 23.5 inched long. From a craftmaster cabinet that is 18 yrs old. How can i replace it so i can have my drawer again.