Viewing all customer Discussions for:

32-061 21-5/8" Self-Closing Drawer Slide Pair

Screws on to draw and wheel moves on track when draw is openen or closed

Needed, one set of 21 1/2 drawer roller slides

I am looking for replacement drawer slide for the provided photo item. Also, individual rollers, if possible.

Very similar to your part number 32-040 Except the roller is on the opposite side.

I am looking for a replacement Merilkat side drawe slide with the L shaped end. Do you know where I can find one?

Hello, I hope all is well on your end. I currently have Unigrass 6600 drawer slides, I would like to replace them with a good quality soft close slide. What slides would you recommend that I purchase? The drawer boxes measure 21 3/4". Additionally, I have a lazy susan with similar builders grade har ... (cont.)

These pictures are from a drawer that still is working. We need these 2 glides to replace ones on a drawer that no longer works. If these pictures don't give you a good idea, let me know.

Socket to hold rear slides has vertical, not horizontal pegs that go into cabinet rear wall Cabinet depth is 22. Track measures 22 1/2 and attaches to inside front

Need replacement drawer glide

This drawer slider has lost the retainer that holds the wheel in place.This is the slider fastened to the wall on the right side of the drawer. It is approximately 20 3/4 ". I saw one on the website that says 21 5/8". Is that the size I need?

I need a pair of slides 22 1/2 long by 3/8 wide with matching end sockets.

Hello, I need drawer rails, please. The numbers are R20207 LDWR and 20207 RDWR. The rails are 21 5/8" long. There are two photographs showing the rail. The rails inside the cabinet are ok. Just the rails on the drawer are bent. Thank you, Lawrence

Need to find replacement rollers. These seem to be worn allowing the drawers to drag. They are part of a Knapp & Vogt slides made in Grand Rapids Mich They are about 7/8 inches

Hi, I am looking for a replacement for a Unigrass 6600 22 inch drawer slider with an "L" ending for an in-cabinet drawer. The drawer is a shallow tray for pots and pans that fits in a double wide cabinet below a cooktop.

I have a left side 21 5/8" X 1" under drawer mounted beige colored guide that has a bent rivet and wheel that I need to replace. Which set should I get? The 6600 model 32-061 is what looks to be the one. Is that correct? Please let me know. Campbell

Hope you can help, we need both lengths drawer glides 17-3/4 & 20-3/4. 4 sets of each. also need 8- 1" plastic spacers to hold glides at correct width

Unable to find plastic guides on cabinet where plastic drawer goes. Unfortunately I am unable to figure out how to attach the photos I took because I can't find this message when I return from photos

For kitchen cabinet drawer. Need the opposite side roller assembly. Right side when face drawer front.

currently have only the drawer insert in attached photo, want to add more using the 32-062 glide

Looking for the hardware that match these items. The slide on the drawer itself measures just over 22 3/8 inches. The slides that are attached to cabinets measure just under 23 inches. Also need the same hardware with measurements of 19 1/2 inches on the drawer and just over 20 inches on the cabine ... (cont.)