Viewing all customer Discussions for:

32-062 23-5/8" Self-Closing Drawer Slide Pair

I found the part number for the Grass Adapter brackets, but I can not find the Draw Slides that I need.

no markings on any of the three pieces. The third piece is the one glued in the back of the cupboard that supports the stationery slide. These pieces do not attach to the wall. There is a space between the slide and the wall

HelloI am Having difficulty finding the replacement bracket from my cabinets that were installed in 1995 it is a euro type the length is 2 1/2 inches and the width is 1 1/4 outside with in 1 1/8 inside width. Do you have this part? Thank you so much for your help.Dina

Hi all, could use an assist with this one. Need to replace a broken kitchen drawer mount. Slide opening is 1 1/8" Everything I've found is much smaller.

Slider on the drawer side of 5 drawers were bent and hard to open. Existing sliders have a smaller roller/wheel. Hoping to find a replacement for the drawer so I do not have to replace both sides. Cabinets were installed in 2004 There are no markings visible on sliders. Appreciate any assistan ... (cont.)

Hi,my name is Singh and I am looking for that plastic holder clip which is holding drawer side rails for the drawer. Can you guys let me know if you guys have that plastic clip part.

I've been to several hardware stores trying to find a drawer glide that will work with drawers in my kitchen that have had the glides break. I need a glide to mount at the back of the opening which will support the track that holds the drawer. I've attached some pictures to give you an idea of wha ... (cont.)

2 1/2 in. Long 1 3/4 in wide (kitchen). No Model #

I have ordered several replacements and not have been the correct size. The issues I've had is they are too narrow for the slide to get into the bracket. There is no markings or any identification on the part. If you could help I would appreciate it.

This opening for the slide to fit in is 1.25" All of the new ones I find at hardware stores are 1" or 7/8". Can I find this size anymore? Cabinets are about 20 yrs old

Hi there, Looking for replacements for some Ferrari drawer sliders. The left slider appears to be model "GS13" and the right slider is "GS11", pictured The drawer hole opening is 21" wide by 9" height. The drawer itself (not the drawer face) is 20" wide by 8.25" height. This means that there is ap ... (cont.)

Please help. The cabinet is 23 1/2" deep and the drawer is 21 3/4" longThe cabinet half of the slide has a right angle bend where it attaches to the plastic mount at the back of the cabinet. I bought 22" slides they will not work. Thank you for any help you can give. Let me know if you need more i ... (cont.)

This is a plastic drawer slide guide that goes in the back of the cabinet. The metal slide goes in the plastic piece. I do not have the name of the company that installed the cabinets nor do I have the name of the cabinet as these were installed when the house was built. Kindly let me know if you pr ... (cont.)

The top set is from a pull-out drawer in kitchen. The bottom set is from a drawer in our den. No part numbers are displayed on the parts. These are both from cabinets installed in 1991. Can you help me to determine as to which replacement parts I need for the sockets and glides if necessary. ... (cont.)

Hi, I'm trying to find replacement slides due to worn rollers. The length of the slide on the drawers is 22.5". The length of the slide on the cabinet box is 23.5". As you can see in the ZOOM pic, the slide ends at a 90 degree angle. The bracket mounts to the back of the cabinet. Having trouble loc ... (cont.)

This drawer slide is 23 5/8" in length from tip to tip. It also has a right angle at the end.

The drawer rails are marked Vogt Industries. The 7/8" nylon roller cracked, and set free all of its ball bearings. Of course these cabinets were new some time in the 70's, which means the style of hardware is probably out of production. Just thought I would give you all a crack at it. And I don't se ... (cont.)

Hi I do need three Self-Closing Drawer Slide Pair the size is 24-04

Need to know if I?m ordering the right part?

Hi, I'm trying to replace these old grass 6600 slides. I believe they are the extended length 23'' ones, and they end in an L shape which then slides into the socket on the back of the cabinet. I need replacement sockets as well. Any help would be much appreciated! Thanks!Alison