Viewing all customer Discussions for:

32-062 23-5/8" Self-Closing Drawer Slide Pair

I have unigrass 6600 side rails . I need a back mount for the slide . I've attached pictures

These rollers have 1/2" plastic wheels with ball bearings and have Grant DL and DR stamped on them. If you have these or an equivalent what is the minimum order for both the right and left sides? Thank you.

Can you tell by these photos which slides I need

I'm looking for a replacement part for what I believe are Rutledge cabinets. This the rear mount for the back of the cabinet. The picture is of the left side railed mounted. The right side is what I'm looking for. The only identification I can find in on the drawer itself.

Having trouble finding replacement part for this late 90's builder grade kitchen drawer. Bent slightly from wear.

I am looking for plastic rear mounts for a sliding cabinet drawer. These have plastic knobs to fit into existing drilled holes. I attached photos of the broken mounts as well as the drawer slides that need to fit in them.

The mounting bracket that attaches to the rear of a cabinet for the left sliding drawer rail.

I don't seem to be able to find a similar slide at the box stores. 1995 hardward

How to ensure i buy right size which one do i measure the one which is screwed to drawer or to the wood wall

These runners were purchased from Masco Cabinetry approximately 20 years ago. Do you have a pair of runners that I can use to replace these? The base cabinets is 24" deep.

part #. nuigrass6600. can't find ?‍?

Hi, So, I found the L-shaped bracket called V-Notch Bracket, but I need to know where to get the white L-shaped European-style drawer slider. One of the wheels is racked, and I must replace the slider. Thanks, Lex

I am in need of a back mounting bracket for a kitchen drawer slide. Mine has pegs on the back that go into the cabinet back wall. What other info do you need?

Looking for the rear brackets for this slide out shelf rail.. My local Hkme Depot and Lowe's only stock 2 and neither works..

How to I remove these without breaking them? How are these installed? Are they glued on?

Hi I'm having trouble finding 23 inch or 23.6 inch slider plus back bracket for that size.

I was trying to move my cabinet drawer up and tried to remove the mounting brackets and ended up breaking one. Can't get them to budge at all. I can't find a replacement online.

I have this rear mounting bracket in my kitchen cabinets, and they appear to be missing all the screws to keep the sliding supports connected to the drawer. I'm not sure if the screws are actually needed. I am on a quest to find this plastic rear mounting bracket and read its installation instructi ... (cont.)

Rear bracket slide brace? 3 inch x2.5 inch. slide opening is 1 inch.

I would like to know if you can identify these. Also, If you carry them, Diamond Cabinets installed 2007