Viewing all customer Discussions for:

39-452 Encore Truth Operator Cover and Handle

I need help identifying the replacement crank handle. I think it's 39-253RB but just wanted to make sure. Also need to know if I need to order other parts while replacing this.

The window will not close the last 2 inches because the teeth on the gears have worn down.

Hi there,I need new crank mechanism for right side. (opposite side from picture.)Thank you.Kirk

Hi there, I am looking for a Truth hing. The upper arm is 7.5 " -8" in total,

I have two windows with 39-393 controllers but with pro handles that keep falling out. I ordered 2 of the 39-393 controllers to replace them with. I've disconnected the 2 arms and removed the 4 screws but the old controllers won't come out, they are somewhat loose but still feels like something hold ... (cont.)

Looking for a window crank replacement for a kitchen window. The crank has a marking of "Truth" and the handle says "Caradaco". The mechanism itself is about 5 inches long. The part of the crank running parallel with the window is about 5 inches long. The long arm is about 10 inches. The curved arm ... (cont.)

The crank for my casement windows are not working properly. Can you help me figure out what one I need to replace them. I can't find the window manufacturer, that it's Truth 30744. Thank you,Theresa

Hello, I'm just looking for what type of crank assembly I need to order to repair 2 windows. Thanks

Hello I am looking for a replacement Truth Window Crank Operator. There is a number on the old operator and I am assuming its a part number; 073012. Do you sell a replacement operator that will match this one?

I've replaced the handle but am still having issues closing the window. The handle doesn't catch properly and I believe the whole mechanism requires replacement.

The gear drive on the Hurd window regulator is stripped and will not close the last 2", has to be pushed or pulled closed

Need for both a left and right window application but the gear on existing operator is centered - not sure what replacement part to order.

We need a left and right window crank w/hardware

Hello, Im looking for an operator in replacement of my 1496-320. Do you have one that will fit. Thanks

I need 3 right and 3 left. The last show dimensions. Thank you,Dale

I need to replace the hardware and casement operator. Currently the operator was made by Bonnieville. The arms are stamped with Truth. That's all I've got.

Hi This crank no longer catches along the teeth/wheels and I am trying to replace it. The window was installed in 2000 by a contractor during a renovation so it may be off brand/no label. There is no name on the crank or the window that we can see, only the number (part number?). The arm is 4 inc ... (cont.)

Can you confirm if this is a 39-439B?If not can you identify it?I need just one ASAPThanks,Ed

I brought a Tafco casement window from Homedepot its 30"x48". It's suppose to be an egress window but because when it opens the window moves towards the left about 6" it width opening is now only 18". I need hardware which will open the window closer to the right frame.This is something I need ASAP ... (cont.)

Hello, The gear on the operator in my Milgard Casement Window is worn, it will open however has a hard time closing unless someone is giving it a push or pull. I have not removed it however I think it will be easy to identify the operator from the attached photos. Thank you and let me know if you ha ... (cont.)