Viewing all customer Discussions for:

82-030 Sliding Patio Door Handle Set, 3-15/16"

We need the keyed locked assemble.

Looking to replace a broken handle on one of our doors. Can you provide me with the part numbers to order and where to order them from?FYI: The gold sticker at the top of the frame has the following code: SDG-r20-72x80, if that helps.Ken

Need locking hardware AND a handle set for this old slider. 82-226 appears (to me) to be right choice but i cant gage the door handle?? Currently installed handle was never meant for this door. See holes. Inner holes are 1 1/2" apart and smaller outer holes 3 15/16 apart. Thoughts? ... (cont.)

need to replace the internal parts...spring is broken and if possible replace outdoor handle that looks bad door was manufactured by Radco in Santa Maria California

Do I need the whole handle or can I get away with just buying the outside handle

The handle is stamped inside right & on lock body has these # DEC07 and PAT#6.264.252 & Pat#5.820.170 hardware is Almond color Looking at Patio Door from inside house the operable panel is on the left x0.The patio door is a Mercer Brand unit. I do not know what series. The inside of thumb turn & ... (cont.)

Looking for replacement handles, indoor and outdoor, as well as the locking mechanism for an old viking sliding door. Screw holes in the picture are for the inside handle and are 3-10/16" apart from center to center. The lockset opening is 3-1/8" tall by 1/2" wide and is also an oval opening. Thank ... (cont.)

I need a new handle for my patio door. the door is a Guardian Door. It is 1.5 inches thick and the holes for the hanles are 3-15/16. please LMK if his can be located.

My latch on my sliding door doesn't go up and down all the time and if it does it doesn't catch the hook on the opposite side to lock.

Hello, Per the attached photos, do you have a replacement handle in stock that matches what I have?

Door handle for sliding glass doors. 2265 Taiwan US Patent 5125703. D340398 sash controlsPlease help me find the correct door handle, We have had our sunroom about 17 years !

HelloI am trying to find a replacement lock and strong handle for the patio door. The handle keeps breaking. It is a Lincoln door. Keyed, sliding to the left from inside, the present mortise lock still works but if you recommend replacing I'm okay.If you have any questions please call 202-557-0059T ... (cont.)

Looking to convert A simonton patio door lock to a keyed lock. I've attached a few pictures. Can you let me know which lock to buy?

I'm looking for the hardware handle and lock for this Windsor patio door thank you Jon.Very important. Door itself has the lock in it but we don't have the plate striker the striker plate or the handle or the lock as you can see in the photographs it was made 2014 in Des Moines Iowa. I have contacte ... (cont.)

Hello I ordered the 82-086 model and was wondering if there was another model where the locking lever slot is on the top instead of the bottom?

I need an internal lock and locking mechanism, the one that slides up and down on the frame work on the left side of the handle. The keeper is fine as shown in photo. The keep dimensions of the keeper are: 9 3/4" in total. Screw hole to screw hole 8 11/16" . Width 11/16". Space between where lock go ... (cont.)

The lock is reversible, but how can you reverse the inside latch? As you can see it needs to be in the hole which is more centered. thank you.

The latch mechanism has broken - not sure if we should replace just the latch or the entire handle. This is not a keyed set. I found the Legacy Handle which looks like a perfect fit except for the placement of the latch. Ours is in the center of the handle versus toward the bottom screw. ... (cont.)

Clad wood 8' door 3 15/16 ctc 6 1/2 overall Center lock lever Would prefer oil rubbed bronze to brushed nickel

please suggest any replacement sets you have that could work