Viewing all customer Discussions for:

15-259 Coil Balance Pivot Shoe

I would like to replace parts in several windows the locks say Prism and the labels have 1258 C15 . Is that enough information for top and bottom replacement parts?

I have 3 different sizes of Simonton vinyl windows I need to replace the broken balances. They have no markings on the coil springs. The first one has a top sash weight of 9.6 #'s and the bottom weight of 10.4 #'s . The second one has a top sash weight of 7 #'s and the bottom weight of 7.6 #'s. ... (cont.)

Part of it is missing

Can you help me identify this and order the part. This in my bathroom.

Hello! I have vinyl double hung Simonton windows from 2010. I believe the existing coil balance is labeled "407S" ?? It is difficulty to identify. Can you assist with which weight is necessary for coil balance to replace the part?

I'm trying determine which parts I need to replace the coil spring and associated components as pictured above.

I appear to have a Prism Window, as identified on the window lock. The left hand side of the window balance is stuck in the groove and separated from the post connected on the window. Appears to have a double coil spring. I need to get the specification on what size coil spring i need to order fo ... (cont.)

split window Simonton windows need Quick tilt coil spring window balance need 8 ea Charles

Looking for correct replacement balancer assembly as pictured, i realize the Simonton parts are obsolete, hoping you guys have a direct replacement. Really hoping to just unscrew the old and put in a new, not looking to rebuild or reconstruct anything. Can NOT find a "weight code" stamped anywhere, ... (cont.)

I need to replace the balance coils

I am trying to get a coil balance to go onto the coil support. I purchased 4 of each and had no problems with 3. Could either the coil balance or the coil support be the wrong size.

I BELIEVE it's just the plastic housing the pivot shoes sit in that is broken but I don't know what kind I need. I need whatever it is going to take to make this window functional. There were no stickers left on window identifying what series...that I could see...

I ordered the 15-259 coil balance pivot shoe, but the coil I have uses screws to attach to the shoe. I am assuming the 15-259 is not correct but I need a different coil/shoe part?

The plastic piece broke in half. The other half is still in the window. Do you have replacement part? If so this is the left side of the lower window.

Single coil window balance (I think that is the correct term for the part(s)) for tilt out vinyl windows. Within the case with the philips screw is wide coil that allows the lower part of the window to open and close smoothly.

That's for a Simonton window.

Coil spring and balance shoe broken. #407 is stamped on coil. All four need replacing.

Hello. I have Simonton double hung windows that were installed in 2002 prior to my purchase of my home. The balance assemblies on 2 windows needs to be replaced (4 total) and so does the tilt latch. (4 total). I also will need a tool to be able to get the current balance assembly out of the trac ... (cont.)

Looking for parts for my double hung Simonton windows. I have 3-windows identical to this.

Hello. The piece is 1 1/4" wide, 3/4" deep and 2 3/4" long. What can I replace with this? I saw there is a coil weight, which one should I buy? Each window is weighing about 12.5 lbs. Thanks