Viewing all customer Discussions for:

95-274 5/16" Square Cut Corner, White

I need help finding the correct screen corners, I went to the local big box store and purchased those little gray ones. They are absolutely not the size I need nor do they fit any of my screen frames. my house is roughly 35 years old and I'll assume all of these corners are that age ... (cont.)

Do you have 5/16" x 3/4" corners that will fit my screen frame? As I repair torn screens, I suspect that I'll have several that will break when I remove the screens because they're so brittle.

I am looking for corner keys for a screen frame with and without the stop.

1 3/4" length both ways, Corner square is 3/4", width 1/2", thickness of sqare part 5/16", thickess of slide in part 1/4"

Need assistance with finding theses corners please

My screen Frame for my pet window is a 1/4 inch frame for a storm door/pet door. I will not replace the door because the 2nd generation wildcat paws at it and I will or a pet door after I take this door off and make the modifications to the door.

Hello, Customer brought in a piece of his broken 5/16 corner after purchasing some 5/16 corners from our store. As you can see in image C_1, the new corner and the remnant of his existing corner butted against the new do not align. please advise if you have any thoughts on our predicament. T ... (cont.)

looking for 100 of these screen corners

Hi! Do you carry this window screen corners

I have 8 Better Bilt windows. Four of the screens are approximately 3' x 2'. Four of the screens are approximately 2' x 2'. I need new corners for each screen. Half of the corners need to have the little pegs that push up to lock the screen in place. Also, I need to replace the spline. I will ... (cont.)

Looking for beige screen corners close to these dimension in pictures.

The home we are working on has General Aluminum windows with OEM screens that we need to rescreen. I need 100 bronze plastic screen corner keys. The dimensions of the the blade that inserts into the hollow section of the aluminum frame are (with the screen laying down flat on the work table) 5/16" ... (cont.)

Am looking for corner key for window screen frame, etc for the above piece. These are 5/16 inch thickness. Please see pictures - Thanks! Lori

Do you have the SilverLine screen parts in the pictures. The corner pieces with the pull tabs are labeled 842-2A, 2B, 2C, 3D. Need both sides of this part and also both sides of the bottom corner pieces. (See IMG_4391.Let me know if you carry the replacement parts and I will let you know the quantit ... (cont.)

We are needing to fix some outside screen frames but the corners are broken and deteriorated. They are Rolox brand windows. We ordered the 3/4 x 3/8 size from your company part no. 95-034 but they are too big. Pictured is the screen in the existing window plus several pictures of the broken corner ... (cont.)

Hi, The screen corners measure> 9/16'' wide X 5/16'' thick X 1'' Long----------- The Bottom Sweep is 1/3-8''wide and has 2 plastic channels that slide into bottom of door. Please research for me ok? Thanks >>>>> Rob

Need white screen corners see attached photos. I.S. demensions 1/4×3/8. 1/2 to slot. O.S. demensions 11/32 x 3/4.

the picture is of a Stanley window screen upper corner insert with pull and latch. The number 842-2A is stamped on the latch tab that slides up and down. I am also looking for the bottom corner inserts w/o the pull or latch. The rolled screen frame is 3/4" wide X 5/16" thick.

I am looking for replacement corners for some existing screens on our house.I am attaching 2 pictures. The screen extrusion is 1/4" x 1/2" inside dimension. The corners are 1/4" thick and total width is 5/8", but the little lip slides into a small groove, leaving 1/2" to fill the extrusion.Anythin ... (cont.)

I purchased 95-263 and 95-262 to make up some screen frames. I thought they fit into a 5/16 frame but it seems that they're sloppy. In the picture with the three corners the plastic corner that is not yours does fit snug. Did I buy the wrong ones? Is there a specific frame to go with these? (I'd rat ... (cont.)