Viewing all customer Discussions for:

90-183 Sash Lock Keeper, 2-1/4"

I have searched everywhere for a replacement for this lock and keeper. The mounting holes are 2-1/4" apart on both pieces. And the holes on the sash are 7/16" from the edge. The keeper is 5/16" deep and 2-3/4" wide. I need to replace a few throughout the house so am hoping to find a match both in ... (cont.)

Need help identifying these type of locks. No brand or part numbers anywhere on the windows. Thank you

Need 2 ea if you have

Purchased a home built in 2005, ive checked everywhere on the window besides the inner frame behind the trim for a manufacturer. Ive ordered several locks with no luck as the non lock parts are usually a tad to thick. Mounting holes are 2 5/16" apart. Thr plastic is brittle and im needing 11 repl ... (cont.)

Measurements: from the center of the hole to the other hole center is 2" 1/4 3/8 from the start of the lock to the hole. The width of the lock is 1" I need 5 of them withe screws

Thermotite back part of double hung window latch.

House built in 1989.

I tried to lock my client's window and the plastic lock broke. Do you have a replacement - I need it as soon as possible. Thank you so much!

The closest item I can find on your site is the 90-278 which is the proper 2 1/16 screw separation but the hole distance out from frame appears to be wrong judging by the photos. I am looking to order about a dozen.

I'm looking for a suitable replacement for this lock.

We are trying to locate replacement part for keeper on our sash locks

Can you give me part numbers for these 2 items? Then i can finish my order. Thank you, James

The latch handle has broken off of 4 of the 14 Weathercraft windows in my house. The person who installed them said Weathercraft is out of business. I was hoping to find 4 replacements that would work in these windows. Any help would be appreciated.

Alcan marking on face Mount hole centers are 2 1/4" apart and 3/8" from front / inside edge. Whole body measures 1 inch including alignment tabs.

We've ordered parts for you as we are fixing some windows in our house. There were a couple of blocks that I've given you Pictures. The closest seems to be your item number 90–180. What's your opinion please

Need to replace window lock. I have uploaded a picture with the measurements.

I've been looking the right sash window but no luck. Then I found out about your website. I sent 4 pictures of one of my broken lock. Hopefully you can help me. Thank you.

Sweep lock door Alumax vinyl double hung window. 2 1/4 between screws. 3/8 set back. Sweep extends 1/4 from body.

White window sweep lock with 2-1/4, the distinguishing detail on it is the tangs that center it over the strike

The keeper is different than most as the tab sticks out instead of pointing downward. on the back of the keeper it looks like there is a 2 on one side, then on the other is 8193 The lock has the name Alpine on the front, holes seem to be about 2 1/4" apart and set back about 3/8" on the back is the ... (cont.)