Viewing all customer Discussions for:

90-183 Sash Lock Keeper, 2-1/4"

I ordered sets of locks and keepers because we had old locks and keepers that were sticky and wouldn't close correctly. I replaced all of the locks and keepers with this product and it worked great on all of the other windows! I'm having trouble with this lock and keeper not lining up. I've clean ... (cont.)

I need window locks for my windows most are missing there sideways sliding

On 10/24/22 order # 1969608 I ordered 10 90-183 sash keepers according to the measurements shown on line. The measurement not shown on line is what I am calling the bridge measurement. The bridge measurement on the broken sash keeper is 1 1/4", the bridge measurement on the 10-183 is 1 3/4" Please h ... (cont.)

I need to replace both the right- and left-hand tilt latches on an old vinyl window. Photos show what I'm working with. The dimensions of the 26-111 item seem to be a match. I've attached photos - does this look like a match to you? I will need the latch and the sash release levers. The 26-119 lev ... (cont.)

The color doesn't matter. They were installed on double hung spiral balances aluminum framed windows maybe in the 90s. They look to be dicast metal brown paint maybe they were bronze in advertisement the center holes work with similar 2.25 inch sash locks but there is no maker mark patent pending is ... (cont.)

Can you help me identify parts for the sash lock and keeper? The keeper screw hole distance is 2-1/4" (measured from the actual hole on window), and is 1/4" depth. I think this is the right one (https://www.swisco.com/keeper/pd/Hung_Sliding-Replacement-Sweep-Locks_Keepers/90-183), but can you verif ... (cont.)

I purchased the wrong window locks for my Climate Guard windows and need some guidance. They are 2 1/4 spacing and the mating lock bar is "deep" and not surface mounted.

(1) First two pictures: It's tilt window lock KEEPER BAR 29 inches long. Do you have this part or closest match?(2) 3rd and 4th Pictures : Block and tackle channel balance : Stamped/engraved 2500 BSI LB. In this one the spring holder is cracked!Do you have this whole part or closest match ?The block ... (cont.)

I have aluminum single hung windows with Alcan hardware. The 90-009 latch (white) is a good replacement for my latch and I can pair it with your 90-109 keeper but I do not see a compatible keeper offered in white. Can the 90-282 (white) be surface mounted on the upper sash to mate with the 90-009 or ... (cont.)

Need the locking assembly

Window lock , need 6 sets

2 1/4" between centers of mounting screws 3/8" to screw centers from latch side

I was able to identify the snap-in glazing (55-092) for my old ALCAN windows, but I haven't been able to narrow down the replacement locking mechanism. Can you help?

Hello,Trying to identify this part. The bottom of the window connects into this for opening and closing. Pic2 is the broken piece, Pic1 is the other side of said window. Right now the window will not stay open due to the breakage. Hoping you guys can help.26B BS1 ELThank you..

I was able to find on your website the two Spiral Balances I need (S400-31), the two metal brackets #62 (17-062) and the Spiral Balance Charging Tool for Non-tilt Windows (75-005). I need to order these parts as soon as possible, but I have four small plastic parts that hopefully you can help me fi ... (cont.)